民工心事 发表于 2024-12-5 20:24:11

Flink 1.19.1 standalone 集群模式摆设及设置

flink 1.19起 conf/flink-conf.yaml 更改为新的 conf/config.yaml
https://i-blog.csdnimg.cn/blog_migrate/f445333edcc79ab7c723cfbbbf6a7fe7.png
standalone集群: dev001、dev002、dev003
config.yaml: jobmanager address 统一使用 dev001，bind-port 统一改成 0.0.0.0，taskmanager address 分别更改为dev地点host
dev001 config.yaml:
################################################################################
#Licensed to the Apache Software Foundation (ASF) under one
#or more contributor license agreements.See the NOTICE file
#distributed with this work for additional information
#regarding copyright ownership.The ASF licenses this file
#to you under the Apache License, Version 2.0 (the
#"License"); you may not use this file except in compliance
#with the License.You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#Unless required by applicable law or agreed to in writing, software
#distributed under the License is distributed on an "AS IS" BASIS,
#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#See the License for the specific language governing permissions and
#limitations under the License.
################################################################################

# These parameters are required for Java 17 support.
# They can be safely removed when using Java 8/11.
env:
java:
    opts:
      all: --add-exports=java.base/sun.net.util=ALL-UNNAMED --add-exports=java.rmi/sun.rmi.registry=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.api=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.file=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.parser=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.tree=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.util=ALL-UNNAMED --add-exports=java.security.jgss/sun.security.krb5=ALL-UNNAMED --add-opens=java.base/java.lang=ALL-UNNAMED --add-opens=java.base/java.net=ALL-UNNAMED --add-opens=java.base/java.io=ALL-UNNAMED --add-opens=java.base/java.nio=ALL-UNNAMED --add-opens=java.base/sun.nio.ch=ALL-UNNAMED --add-opens=java.base/java.lang.reflect=ALL-UNNAMED --add-opens=java.base/java.text=ALL-UNNAMED --add-opens=java.base/java.time=ALL-UNNAMED --add-opens=java.base/java.util=ALL-UNNAMED --add-opens=java.base/java.util.concurrent=ALL-UNNAMED --add-opens=java.base/java.util.concurrent.atomic=ALL-UNNAMED --add-opens=java.base/java.util.concurrent.locks=ALL-UNNAMED

#==============================================================================
# Common
#==============================================================================

jobmanager:
# The host interface the JobManager will bind to. By default, this is localhost, and will prevent
# the JobManager from communicating outside the machine/container it is running on.
# On YARN this setting will be ignored if it is set to 'localhost', defaulting to 0.0.0.0.
# On Kubernetes this setting will be ignored, defaulting to 0.0.0.0.
#
# To enable this, set the bind-host address to one that has access to an outside facing network
# interface, such as 0.0.0.0.
bind-host: 0.0.0.0
rpc:
    # The external address of the host on which the JobManager runs and can be
    # reached by the TaskManagers and any clients which want to connect. This setting
    # is only used in Standalone mode and may be overwritten on the JobManager side
    # by specifying the --host <hostname> parameter of the bin/jobmanager.sh executable.
    # In high availability mode, if you use the bin/start-cluster.sh script and setup
    # the conf/masters file, this will be taken care of automatically. Yarn
    # automatically configure the host name based on the hostname of the node where the
    # JobManager runs.
    address: dev001
    # The RPC port where the JobManager is reachable.
    port: 6123
memory:
    process:
      # The total process memory size for the JobManager.
      # Note this accounts for all memory usage within the JobManager process, including JVM metaspace and other overhead.
      size: 1600m
execution:
    # The failover strategy, i.e., how the job computation recovers from task failures.
    # Only restart tasks that may have been affected by the task failure, which typically includes
    # downstream tasks and potentially upstream tasks if their produced data is no longer available for consumption.
    failover-strategy: region

taskmanager:
# The host interface the TaskManager will bind to. By default, this is localhost, and will prevent
# the TaskManager from communicating outside the machine/container it is running on.
# On YARN this setting will be ignored if it is set to 'localhost', defaulting to 0.0.0.0.
# On Kubernetes this setting will be ignored, defaulting to 0.0.0.0.
#
# To enable this, set the bind-host address to one that has access to an outside facing network
# interface, such as 0.0.0.0.
bind-host: 0.0.0.0
# The address of the host on which the TaskManager runs and can be reached by the JobManager and
# other TaskManagers. If not specified, the TaskManager will try different strategies to identify
# the address.
#
# Note this address needs to be reachable by the JobManager and forward traffic to one of
# the interfaces the TaskManager is bound to (see 'taskmanager.bind-host').
#
# Note also that unless all TaskManagers are running on the same machine, this address needs to be
# configured separately for each TaskManager.
host: dev001
# The number of task slots that each TaskManager offers. Each slot runs one parallel pipeline.
numberOfTaskSlots: 2
memory:
    process:
      # The total process memory size for the TaskManager.
      #
      # Note this accounts for all memory usage within the TaskManager process, including JVM metaspace and other overhead.
      # To exclude JVM metaspace and overhead, please, use total Flink memory size instead of 'taskmanager.memory.process.size'.
      # It is not recommended to set both 'taskmanager.memory.process.size' and Flink memory.
      size: 1728m

parallelism:
# The parallelism used for programs that did not specify and other parallelism.
default: 1

# # The default file system scheme and authority.
# # By default file paths without scheme are interpreted relative to the local
# # root file system 'file:///'. Use this to override the default and interpret
# # relative paths relative to a different file system,
# # for example 'hdfs://mynamenode:12345'
# fs:
#   default-scheme: hdfs://mynamenode:12345

#==============================================================================
# High Availability
#==============================================================================

# high-availability:
#   # The high-availability mode. Possible options are 'NONE' or 'zookeeper'.
#   type: zookeeper
#   # The path where metadata for master recovery is persisted. While ZooKeeper stores
#   # the small ground truth for checkpoint and leader election, this location stores
#   # the larger objects, like persisted dataflow graphs.
#   #
#   # Must be a durable file system that is accessible from all nodes
#   # (like HDFS, S3, Ceph, nfs, ...)
#   storageDir: hdfs:///flink/ha/
#   zookeeper:
#   # The list of ZooKeeper quorum peers that coordinate the high-availability
#   # setup. This must be a list of the form:
#   # "host1:clientPort,host2:clientPort,..." (default clientPort: 2181)
#   quorum: localhost:2181
#   client:
#       # ACL options are based on https://zookeeper.apache.org/doc/r3.1.2/zookeeperProgrammers.html#sc_BuiltinACLSchemes
#       # It can be either "creator" (ZOO_CREATE_ALL_ACL) or "open" (ZOO_OPEN_ACL_UNSAFE)
#       # The default value is "open" and it can be changed to "creator" if ZK security is enabled
#       acl: open

#==============================================================================
# Fault tolerance and checkpointing
#==============================================================================

# The backend that will be used to store operator state checkpoints if
# checkpointing is enabled. Checkpointing is enabled when execution.checkpointing.interval > 0.

# # Execution checkpointing related parameters. Please refer to CheckpointConfig and ExecutionCheckpointingOptions for more details.
# execution:
#   checkpointing:
#   interval: 3min
#   externalized-checkpoint-retention:
#   max-concurrent-checkpoints: 1
#   min-pause: 0
#   mode:
#   timeout: 10min
#   tolerable-failed-checkpoints: 0
#   unaligned: false

# state:
#   backend:
#   # Supported backends are 'hashmap', 'rocksdb', or the
#   # <class-name-of-factory>.
#   type: hashmap
#   # Flag to enable/disable incremental checkpoints for backends that
#   # support incremental checkpoints (like the RocksDB state backend).
#   incremental: false
#   checkpoints:
#       # Directory for checkpoints filesystem, when using any of the default bundled
#       # state backends.
#       dir: hdfs://namenode-host:port/flink-checkpoints
#   savepoints:
#       # Default target directory for savepoints, optional.
#       dir: hdfs://namenode-host:port/flink-savepoints

#==============================================================================
# Rest & web frontend
#==============================================================================

rest:
# The address to which the REST client will connect to
address: dev001
# The address that the REST & web server binds to
# By default, this is localhost, which prevents the REST & web server from
# being able to communicate outside of the machine/container it is running on.
#
# To enable this, set the bind address to one that has access to outside-facing
# network interface, such as 0.0.0.0.
bind-address: 0.0.0.0
# # The port to which the REST client connects to. If rest.bind-port has
# # not been specified, then the server will bind to this port as well.
# port: 8081
# # Port range for the REST and web server to bind to.
# bind-port: 8080-8090

# web:
#   submit:
#   # Flag to specify whether job submission is enabled from the web-based
#   # runtime monitor. Uncomment to disable.
#   enable: false
#   cancel:
#   # Flag to specify whether job cancellation is enabled from the web-based
#   # runtime monitor. Uncomment to disable.
#   enable: false

#==============================================================================
# Advanced
#==============================================================================

# io:
#   tmp:
#   # Override the directories for temporary files. If not specified, the
#   # system-specific Java temporary directory (java.io.tmpdir property) is taken.
#   #
#   # For framework setups on Yarn, Flink will automatically pick up the
#   # containers' temp directories without any need for configuration.
#   #
#   # Add a delimited list for multiple directories, using the system directory
#   # delimiter (colon ':' on unix) or a comma, e.g.:
#   # /data1/tmp:/data2/tmp:/data3/tmp
#   #
#   # Note: Each directory entry is read from and written to by a different I/O
#   # thread. You can include the same directory multiple times in order to create
#   # multiple I/O threads against that directory. This is for example relevant for
#   # high-throughput RAIDs.
#   dirs: /tmp

# classloader:
#   resolve:
#   # The classloading resolve order. Possible values are 'child-first' (Flink's default)
#   # and 'parent-first' (Java's default).
#   #
#   # Child first classloading allows users to use different dependency/library
#   # versions in their application than those in the classpath. Switching back
#   # to 'parent-first' may help with debugging dependency issues.
#   order: child-first

# The amount of memory going to the network stack. These numbers usually need
# no tuning. Adjusting them may be necessary in case of an "Insufficient number
# of network buffers" error. The default min is 64MB, the default max is 1GB.
#
# taskmanager:
#   memory:
#   network:
#       fraction: 0.1
#       min: 64mb
#       max: 1gb

#==============================================================================
# Flink Cluster Security Configuration
#==============================================================================

# Kerberos authentication for various components - Hadoop, ZooKeeper, and connectors -
# may be enabled in four steps:
# 1. configure the local krb5.conf file
# 2. provide Kerberos credentials (either a keytab or a ticket cache w/ kinit)
# 3. make the credentials available to various JAAS login contexts
# 4. configure the connector to use JAAS/SASL

# # The below configure how Kerberos credentials are provided. A keytab will be used instead of
# # a ticket cache if the keytab path and principal are set.
# security:
#   kerberos:
#   login:
#       use-ticket-cache: true
#       keytab: /path/to/kerberos/keytab
#       principal: flink-user
#       # The configuration below defines which JAAS login contexts
#       contexts: Client,KafkaClient

#==============================================================================
# ZK Security Configuration
#==============================================================================

# zookeeper:
#   sasl:
#   # Below configurations are applicable if ZK ensemble is configured for security
#   #
#   # Override below configuration to provide custom ZK service name if configured
#   # zookeeper.sasl.service-name: zookeeper
#   #
#   # The configuration below must match one of the values set in "security.kerberos.login.contexts"
#   login-context-name: Client

#==============================================================================
# HistoryServer
#==============================================================================

# The HistoryServer is started and stopped via bin/historyserver.sh (start|stop)
#
# jobmanager:
#   archive:
#   fs:
#       # Directory to upload completed jobs to. Add this directory to the list of
#       # monitored directories of the HistoryServer as well (see below).
#       dir: hdfs:///completed-jobs/

# historyserver:
#   web:
#   # The address under which the web-based HistoryServer listens.
#   address: 0.0.0.0
#   # The port under which the web-based HistoryServer listens.
#   port: 8082
#   archive:
#   fs:
#       # Comma separated list of directories to monitor for completed jobs.
#       dir: hdfs:///completed-jobs/
#       # Interval in milliseconds for refreshing the monitored directories.
#       fs.refresh-interval: 10000


dev002 config.yaml:
################################################################################
#Licensed to the Apache Software Foundation (ASF) under one
#or more contributor license agreements.See the NOTICE file
#distributed with this work for additional information
#regarding copyright ownership.The ASF licenses this file
#to you under the Apache License, Version 2.0 (the
#"License"); you may not use this file except in compliance
#with the License.You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#Unless required by applicable law or agreed to in writing, software
#distributed under the License is distributed on an "AS IS" BASIS,
#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#See the License for the specific language governing permissions and
#limitations under the License.
################################################################################

# These parameters are required for Java 17 support.
# They can be safely removed when using Java 8/11.
env:
java:
    opts:
      all: --add-exports=java.base/sun.net.util=ALL-UNNAMED --add-exports=java.rmi/sun.rmi.registry=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.api=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.file=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.parser=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.tree=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.util=ALL-UNNAMED --add-exports=java.security.jgss/sun.security.krb5=ALL-UNNAMED --add-opens=java.base/java.lang=ALL-UNNAMED --add-opens=java.base/java.net=ALL-UNNAMED --add-opens=java.base/java.io=ALL-UNNAMED --add-opens=java.base/java.nio=ALL-UNNAMED --add-opens=java.base/sun.nio.ch=ALL-UNNAMED --add-opens=java.base/java.lang.reflect=ALL-UNNAMED --add-opens=java.base/java.text=ALL-UNNAMED --add-opens=java.base/java.time=ALL-UNNAMED --add-opens=java.base/java.util=ALL-UNNAMED --add-opens=java.base/java.util.concurrent=ALL-UNNAMED --add-opens=java.base/java.util.concurrent.atomic=ALL-UNNAMED --add-opens=java.base/java.util.concurrent.locks=ALL-UNNAMED

#==============================================================================
# Common
#==============================================================================

jobmanager:
# The host interface the JobManager will bind to. By default, this is localhost, and will prevent
# the JobManager from communicating outside the machine/container it is running on.
# On YARN this setting will be ignored if it is set to 'localhost', defaulting to 0.0.0.0.
# On Kubernetes this setting will be ignored, defaulting to 0.0.0.0.
#
# To enable this, set the bind-host address to one that has access to an outside facing network
# interface, such as 0.0.0.0.
bind-host: 0.0.0.0
rpc:
    # The external address of the host on which the JobManager runs and can be
    # reached by the TaskManagers and any clients which want to connect. This setting
    # is only used in Standalone mode and may be overwritten on the JobManager side
    # by specifying the --host <hostname> parameter of the bin/jobmanager.sh executable.
    # In high availability mode, if you use the bin/start-cluster.sh script and setup
    # the conf/masters file, this will be taken care of automatically. Yarn
    # automatically configure the host name based on the hostname of the node where the
    # JobManager runs.
    address: dev001
    # The RPC port where the JobManager is reachable.
    port: 6123
memory:
    process:
      # The total process memory size for the JobManager.
      # Note this accounts for all memory usage within the JobManager process, including JVM metaspace and other overhead.
      size: 1600m
execution:
    # The failover strategy, i.e., how the job computation recovers from task failures.
    # Only restart tasks that may have been affected by the task failure, which typically includes
    # downstream tasks and potentially upstream tasks if their produced data is no longer available for consumption.
    failover-strategy: region

taskmanager:
# The host interface the TaskManager will bind to. By default, this is localhost, and will prevent
# the TaskManager from communicating outside the machine/container it is running on.
# On YARN this setting will be ignored if it is set to 'localhost', defaulting to 0.0.0.0.
# On Kubernetes this setting will be ignored, defaulting to 0.0.0.0.
#
# To enable this, set the bind-host address to one that has access to an outside facing network
# interface, such as 0.0.0.0.
bind-host: 0.0.0.0
# The address of the host on which the TaskManager runs and can be reached by the JobManager and
# other TaskManagers. If not specified, the TaskManager will try different strategies to identify
# the address.
#
# Note this address needs to be reachable by the JobManager and forward traffic to one of
# the interfaces the TaskManager is bound to (see 'taskmanager.bind-host').
#
# Note also that unless all TaskManagers are running on the same machine, this address needs to be
# configured separately for each TaskManager.
host: dev002
# The number of task slots that each TaskManager offers. Each slot runs one parallel pipeline.
numberOfTaskSlots: 2
memory:
    process:
      # The total process memory size for the TaskManager.
      #
      # Note this accounts for all memory usage within the TaskManager process, including JVM metaspace and other overhead.
      # To exclude JVM metaspace and overhead, please, use total Flink memory size instead of 'taskmanager.memory.process.size'.
      # It is not recommended to set both 'taskmanager.memory.process.size' and Flink memory.
      size: 1728m

parallelism:
# The parallelism used for programs that did not specify and other parallelism.
default: 1

# # The default file system scheme and authority.
# # By default file paths without scheme are interpreted relative to the local
# # root file system 'file:///'. Use this to override the default and interpret
# # relative paths relative to a different file system,
# # for example 'hdfs://mynamenode:12345'
# fs:
#   default-scheme: hdfs://mynamenode:12345

#==============================================================================
# High Availability
#==============================================================================

# high-availability:
#   # The high-availability mode. Possible options are 'NONE' or 'zookeeper'.
#   type: zookeeper
#   # The path where metadata for master recovery is persisted. While ZooKeeper stores
#   # the small ground truth for checkpoint and leader election, this location stores
#   # the larger objects, like persisted dataflow graphs.
#   #
#   # Must be a durable file system that is accessible from all nodes
#   # (like HDFS, S3, Ceph, nfs, ...)
#   storageDir: hdfs:///flink/ha/
#   zookeeper:
#   # The list of ZooKeeper quorum peers that coordinate the high-availability
#   # setup. This must be a list of the form:
#   # "host1:clientPort,host2:clientPort,..." (default clientPort: 2181)
#   quorum: localhost:2181
#   client:
#       # ACL options are based on https://zookeeper.apache.org/doc/r3.1.2/zookeeperProgrammers.html#sc_BuiltinACLSchemes
#       # It can be either "creator" (ZOO_CREATE_ALL_ACL) or "open" (ZOO_OPEN_ACL_UNSAFE)
#       # The default value is "open" and it can be changed to "creator" if ZK security is enabled
#       acl: open

#==============================================================================
# Fault tolerance and checkpointing
#==============================================================================

# The backend that will be used to store operator state checkpoints if
# checkpointing is enabled. Checkpointing is enabled when execution.checkpointing.interval > 0.

# # Execution checkpointing related parameters. Please refer to CheckpointConfig and ExecutionCheckpointingOptions for more details.
# execution:
#   checkpointing:
#   interval: 3min
#   externalized-checkpoint-retention:
#   max-concurrent-checkpoints: 1
#   min-pause: 0
#   mode:
#   timeout: 10min
#   tolerable-failed-checkpoints: 0
#   unaligned: false

# state:
#   backend:
#   # Supported backends are 'hashmap', 'rocksdb', or the
#   # <class-name-of-factory>.
#   type: hashmap
#   # Flag to enable/disable incremental checkpoints for backends that
#   # support incremental checkpoints (like the RocksDB state backend).
#   incremental: false
#   checkpoints:
#       # Directory for checkpoints filesystem, when using any of the default bundled
#       # state backends.
#       dir: hdfs://namenode-host:port/flink-checkpoints
#   savepoints:
#       # Default target directory for savepoints, optional.
#       dir: hdfs://namenode-host:port/flink-savepoints

#==============================================================================
# Rest & web frontend
#==============================================================================

rest:
# The address to which the REST client will connect to
address: dev002
# The address that the REST & web server binds to
# By default, this is localhost, which prevents the REST & web server from
# being able to communicate outside of the machine/container it is running on.
#
# To enable this, set the bind address to one that has access to outside-facing
# network interface, such as 0.0.0.0.
bind-address: 0.0.0.0
# # The port to which the REST client connects to. If rest.bind-port has
# # not been specified, then the server will bind to this port as well.
# port: 8081
# # Port range for the REST and web server to bind to.
# bind-port: 8080-8090

# web:
#   submit:
#   # Flag to specify whether job submission is enabled from the web-based
#   # runtime monitor. Uncomment to disable.
#   enable: false
#   cancel:
#   # Flag to specify whether job cancellation is enabled from the web-based
#   # runtime monitor. Uncomment to disable.
#   enable: false

#==============================================================================
# Advanced
#==============================================================================

# io:
#   tmp:
#   # Override the directories for temporary files. If not specified, the
#   # system-specific Java temporary directory (java.io.tmpdir property) is taken.
#   #
#   # For framework setups on Yarn, Flink will automatically pick up the
#   # containers' temp directories without any need for configuration.
#   #
#   # Add a delimited list for multiple directories, using the system directory
#   # delimiter (colon ':' on unix) or a comma, e.g.:
#   # /data1/tmp:/data2/tmp:/data3/tmp
#   #
#   # Note: Each directory entry is read from and written to by a different I/O
#   # thread. You can include the same directory multiple times in order to create
#   # multiple I/O threads against that directory. This is for example relevant for
#   # high-throughput RAIDs.
#   dirs: /tmp

# classloader:
#   resolve:
#   # The classloading resolve order. Possible values are 'child-first' (Flink's default)
#   # and 'parent-first' (Java's default).
#   #
#   # Child first classloading allows users to use different dependency/library
#   # versions in their application than those in the classpath. Switching back
#   # to 'parent-first' may help with debugging dependency issues.
#   order: child-first

# The amount of memory going to the network stack. These numbers usually need
# no tuning. Adjusting them may be necessary in case of an "Insufficient number
# of network buffers" error. The default min is 64MB, the default max is 1GB.
#
# taskmanager:
#   memory:
#   network:
#       fraction: 0.1
#       min: 64mb
#       max: 1gb

#==============================================================================
# Flink Cluster Security Configuration
#==============================================================================

# Kerberos authentication for various components - Hadoop, ZooKeeper, and connectors -
# may be enabled in four steps:
# 1. configure the local krb5.conf file
# 2. provide Kerberos credentials (either a keytab or a ticket cache w/ kinit)
# 3. make the credentials available to various JAAS login contexts
# 4. configure the connector to use JAAS/SASL

# # The below configure how Kerberos credentials are provided. A keytab will be used instead of
# # a ticket cache if the keytab path and principal are set.
# security:
#   kerberos:
#   login:
#       use-ticket-cache: true
#       keytab: /path/to/kerberos/keytab
#       principal: flink-user
#       # The configuration below defines which JAAS login contexts
#       contexts: Client,KafkaClient

#==============================================================================
# ZK Security Configuration
#==============================================================================

# zookeeper:
#   sasl:
#   # Below configurations are applicable if ZK ensemble is configured for security
#   #
#   # Override below configuration to provide custom ZK service name if configured
#   # zookeeper.sasl.service-name: zookeeper
#   #
#   # The configuration below must match one of the values set in "security.kerberos.login.contexts"
#   login-context-name: Client

#==============================================================================
# HistoryServer
#==============================================================================

# The HistoryServer is started and stopped via bin/historyserver.sh (start|stop)
#
# jobmanager:
#   archive:
#   fs:
#       # Directory to upload completed jobs to. Add this directory to the list of
#       # monitored directories of the HistoryServer as well (see below).
#       dir: hdfs:///completed-jobs/

# historyserver:
#   web:
#   # The address under which the web-based HistoryServer listens.
#   address: 0.0.0.0
#   # The port under which the web-based HistoryServer listens.
#   port: 8082
#   archive:
#   fs:
#       # Comma separated list of directories to monitor for completed jobs.
#       dir: hdfs:///completed-jobs/
#       # Interval in milliseconds for refreshing the monitored directories.
#       fs.refresh-interval: 10000


dev003 config.yaml:
################################################################################
#Licensed to the Apache Software Foundation (ASF) under one
#or more contributor license agreements.See the NOTICE file
#distributed with this work for additional information
#regarding copyright ownership.The ASF licenses this file
#to you under the Apache License, Version 2.0 (the
#"License"); you may not use this file except in compliance
#with the License.You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#Unless required by applicable law or agreed to in writing, software
#distributed under the License is distributed on an "AS IS" BASIS,
#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#See the License for the specific language governing permissions and
#limitations under the License.
################################################################################

# These parameters are required for Java 17 support.
# They can be safely removed when using Java 8/11.
env:
java:
    opts:
      all: --add-exports=java.base/sun.net.util=ALL-UNNAMED --add-exports=java.rmi/sun.rmi.registry=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.api=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.file=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.parser=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.tree=ALL-UNNAMED --add-exports=jdk.compiler/com.sun.tools.javac.util=ALL-UNNAMED --add-exports=java.security.jgss/sun.security.krb5=ALL-UNNAMED --add-opens=java.base/java.lang=ALL-UNNAMED --add-opens=java.base/java.net=ALL-UNNAMED --add-opens=java.base/java.io=ALL-UNNAMED --add-opens=java.base/java.nio=ALL-UNNAMED --add-opens=java.base/sun.nio.ch=ALL-UNNAMED --add-opens=java.base/java.lang.reflect=ALL-UNNAMED --add-opens=java.base/java.text=ALL-UNNAMED --add-opens=java.base/java.time=ALL-UNNAMED --add-opens=java.base/java.util=ALL-UNNAMED --add-opens=java.base/java.util.concurrent=ALL-UNNAMED --add-opens=java.base/java.util.concurrent.atomic=ALL-UNNAMED --add-opens=java.base/java.util.concurrent.locks=ALL-UNNAMED

#==============================================================================
# Common
#==============================================================================

jobmanager:
# The host interface the JobManager will bind to. By default, this is localhost, and will prevent
# the JobManager from communicating outside the machine/container it is running on.
# On YARN this setting will be ignored if it is set to 'localhost', defaulting to 0.0.0.0.
# On Kubernetes this setting will be ignored, defaulting to 0.0.0.0.
#
# To enable this, set the bind-host address to one that has access to an outside facing network
# interface, such as 0.0.0.0.
bind-host: 0.0.0.0
rpc:
    # The external address of the host on which the JobManager runs and can be
    # reached by the TaskManagers and any clients which want to connect. This setting
    # is only used in Standalone mode and may be overwritten on the JobManager side
    # by specifying the --host <hostname> parameter of the bin/jobmanager.sh executable.
    # In high availability mode, if you use the bin/start-cluster.sh script and setup
    # the conf/masters file, this will be taken care of automatically. Yarn
    # automatically configure the host name based on the hostname of the node where the
    # JobManager runs.
    address: dev001
    # The RPC port where the JobManager is reachable.
    port: 6123
memory:
    process:
      # The total process memory size for the JobManager.
      # Note this accounts for all memory usage within the JobManager process, including JVM metaspace and other overhead.
      size: 1600m
execution:
    # The failover strategy, i.e., how the job computation recovers from task failures.
    # Only restart tasks that may have been affected by the task failure, which typically includes
    # downstream tasks and potentially upstream tasks if their produced data is no longer available for consumption.
    failover-strategy: region

taskmanager:
# The host interface the TaskManager will bind to. By default, this is localhost, and will prevent
# the TaskManager from communicating outside the machine/container it is running on.
# On YARN this setting will be ignored if it is set to 'localhost', defaulting to 0.0.0.0.
# On Kubernetes this setting will be ignored, defaulting to 0.0.0.0.
#
# To enable this, set the bind-host address to one that has access to an outside facing network
# interface, such as 0.0.0.0.
bind-host: 0.0.0.0
# The address of the host on which the TaskManager runs and can be reached by the JobManager and
# other TaskManagers. If not specified, the TaskManager will try different strategies to identify
# the address.
#
# Note this address needs to be reachable by the JobManager and forward traffic to one of
# the interfaces the TaskManager is bound to (see 'taskmanager.bind-host').
#
# Note also that unless all TaskManagers are running on the same machine, this address needs to be
# configured separately for each TaskManager.
host: dev003
# The number of task slots that each TaskManager offers. Each slot runs one parallel pipeline.
numberOfTaskSlots: 2
memory:
    process:
      # The total process memory size for the TaskManager.
      #
      # Note this accounts for all memory usage within the TaskManager process, including JVM metaspace and other overhead.
      # To exclude JVM metaspace and overhead, please, use total Flink memory size instead of 'taskmanager.memory.process.size'.
      # It is not recommended to set both 'taskmanager.memory.process.size' and Flink memory.
      size: 1728m

parallelism:
# The parallelism used for programs that did not specify and other parallelism.
default: 1

# # The default file system scheme and authority.
# # By default file paths without scheme are interpreted relative to the local
# # root file system 'file:///'. Use this to override the default and interpret
# # relative paths relative to a different file system,
# # for example 'hdfs://mynamenode:12345'
# fs:
#   default-scheme: hdfs://mynamenode:12345

#==============================================================================
# High Availability
#==============================================================================

# high-availability:
#   # The high-availability mode. Possible options are 'NONE' or 'zookeeper'.
#   type: zookeeper
#   # The path where metadata for master recovery is persisted. While ZooKeeper stores
#   # the small ground truth for checkpoint and leader election, this location stores
#   # the larger objects, like persisted dataflow graphs.
#   #
#   # Must be a durable file system that is accessible from all nodes
#   # (like HDFS, S3, Ceph, nfs, ...)
#   storageDir: hdfs:///flink/ha/
#   zookeeper:
#   # The list of ZooKeeper quorum peers that coordinate the high-availability
#   # setup. This must be a list of the form:
#   # "host1:clientPort,host2:clientPort,..." (default clientPort: 2181)
#   quorum: localhost:2181
#   client:
#       # ACL options are based on https://zookeeper.apache.org/doc/r3.1.2/zookeeperProgrammers.html#sc_BuiltinACLSchemes
#       # It can be either "creator" (ZOO_CREATE_ALL_ACL) or "open" (ZOO_OPEN_ACL_UNSAFE)
#       # The default value is "open" and it can be changed to "creator" if ZK security is enabled
#       acl: open

#==============================================================================
# Fault tolerance and checkpointing
#==============================================================================

# The backend that will be used to store operator state checkpoints if
# checkpointing is enabled. Checkpointing is enabled when execution.checkpointing.interval > 0.

# # Execution checkpointing related parameters. Please refer to CheckpointConfig and ExecutionCheckpointingOptions for more details.
# execution:
#   checkpointing:
#   interval: 3min
#   externalized-checkpoint-retention:
#   max-concurrent-checkpoints: 1
#   min-pause: 0
#   mode:
#   timeout: 10min
#   tolerable-failed-checkpoints: 0
#   unaligned: false

# state:
#   backend:
#   # Supported backends are 'hashmap', 'rocksdb', or the
#   # <class-name-of-factory>.
#   type: hashmap
#   # Flag to enable/disable incremental checkpoints for backends that
#   # support incremental checkpoints (like the RocksDB state backend).
#   incremental: false
#   checkpoints:
#       # Directory for checkpoints filesystem, when using any of the default bundled
#       # state backends.
#       dir: hdfs://namenode-host:port/flink-checkpoints
#   savepoints:
#       # Default target directory for savepoints, optional.
#       dir: hdfs://namenode-host:port/flink-savepoints

#==============================================================================
# Rest & web frontend
#==============================================================================

rest:
# The address to which the REST client will connect to
address: dev003
# The address that the REST & web server binds to
# By default, this is localhost, which prevents the REST & web server from
# being able to communicate outside of the machine/container it is running on.
#
# To enable this, set the bind address to one that has access to outside-facing
# network interface, such as 0.0.0.0.
bind-address: 0.0.0.0
# # The port to which the REST client connects to. If rest.bind-port has
# # not been specified, then the server will bind to this port as well.
# port: 8081
# # Port range for the REST and web server to bind to.
# bind-port: 8080-8090

# web:
#   submit:
#   # Flag to specify whether job submission is enabled from the web-based
#   # runtime monitor. Uncomment to disable.
#   enable: false
#   cancel:
#   # Flag to specify whether job cancellation is enabled from the web-based
#   # runtime monitor. Uncomment to disable.
#   enable: false

#==============================================================================
# Advanced
#==============================================================================

# io:
#   tmp:
#   # Override the directories for temporary files. If not specified, the
#   # system-specific Java temporary directory (java.io.tmpdir property) is taken.
#   #
#   # For framework setups on Yarn, Flink will automatically pick up the
#   # containers' temp directories without any need for configuration.
#   #
#   # Add a delimited list for multiple directories, using the system directory
#   # delimiter (colon ':' on unix) or a comma, e.g.:
#   # /data1/tmp:/data2/tmp:/data3/tmp
#   #
#   # Note: Each directory entry is read from and written to by a different I/O
#   # thread. You can include the same directory multiple times in order to create
#   # multiple I/O threads against that directory. This is for example relevant for
#   # high-throughput RAIDs.
#   dirs: /tmp

# classloader:
#   resolve:
#   # The classloading resolve order. Possible values are 'child-first' (Flink's default)
#   # and 'parent-first' (Java's default).
#   #
#   # Child first classloading allows users to use different dependency/library
#   # versions in their application than those in the classpath. Switching back
#   # to 'parent-first' may help with debugging dependency issues.
#   order: child-first

# The amount of memory going to the network stack. These numbers usually need
# no tuning. Adjusting them may be necessary in case of an "Insufficient number
# of network buffers" error. The default min is 64MB, the default max is 1GB.
#
# taskmanager:
#   memory:
#   network:
#       fraction: 0.1
#       min: 64mb
#       max: 1gb

#==============================================================================
# Flink Cluster Security Configuration
#==============================================================================

# Kerberos authentication for various components - Hadoop, ZooKeeper, and connectors -
# may be enabled in four steps:
# 1. configure the local krb5.conf file
# 2. provide Kerberos credentials (either a keytab or a ticket cache w/ kinit)
# 3. make the credentials available to various JAAS login contexts
# 4. configure the connector to use JAAS/SASL

# # The below configure how Kerberos credentials are provided. A keytab will be used instead of
# # a ticket cache if the keytab path and principal are set.
# security:
#   kerberos:
#   login:
#       use-ticket-cache: true
#       keytab: /path/to/kerberos/keytab
#       principal: flink-user
#       # The configuration below defines which JAAS login contexts
#       contexts: Client,KafkaClient

#==============================================================================
# ZK Security Configuration
#==============================================================================

# zookeeper:
#   sasl:
#   # Below configurations are applicable if ZK ensemble is configured for security
#   #
#   # Override below configuration to provide custom ZK service name if configured
#   # zookeeper.sasl.service-name: zookeeper
#   #
#   # The configuration below must match one of the values set in "security.kerberos.login.contexts"
#   login-context-name: Client

#==============================================================================
# HistoryServer
#==============================================================================

# The HistoryServer is started and stopped via bin/historyserver.sh (start|stop)
#
# jobmanager:
#   archive:
#   fs:
#       # Directory to upload completed jobs to. Add this directory to the list of
#       # monitored directories of the HistoryServer as well (see below).
#       dir: hdfs:///completed-jobs/

# historyserver:
#   web:
#   # The address under which the web-based HistoryServer listens.
#   address: 0.0.0.0
#   # The port under which the web-based HistoryServer listens.
#   port: 8082
#   archive:
#   fs:
#       # Comma separated list of directories to monitor for completed jobs.
#       dir: hdfs:///completed-jobs/
#       # Interval in milliseconds for refreshing the monitored directories.
#       fs.refresh-interval: 10000

conf/masters 及 conf/works 使用 xsync 同步分发命令 分发到各机器节点即可：
https://i-blog.csdnimg.cn/blog_migrate/e086e10865601cfbe892b57cd7589191.png
-- masters
dev001:8081

-- workers
dev001
dev002
dev003
增补：
linux 查看port是否被占用：nestat -apn|grep 8081
linux 查看各节点flink使命：jps


免责声明：如果侵犯了您的权益，请联系站长，我们会及时删除侵权内容，谢谢合作！更多信息从访问主页：qidao123.com:ToB企服之家，中国第一个企服评测及商务社交产业平台。
页: [1]
查看完整版本: Flink 1.19.1 standalone 集群模式摆设及设置