Windows10配置C++版本的Kafka，并进行发布和订阅测试
配置的情况为：Release x64下的情况完整项目：https://gitee.com/jiajingong/kafka-publisher
1、首先下载相应的库文件（.lib，.dll）
参考链接：
GitHub - eStreamSoftware/delphi-kafka
GitHub - cloader/KafkaCPP-win32-dll: KafkaCpp-win32-dll
2、新建一个新的下令行C++工程
建完工程后，选择Release x64，并在天生中执行重新天生解决方案，这样会在项目目次下天生x64/Release文件夹
3、通过VS2017配置附加库目次和附加依赖项
所有的.lib、.dll等库文件均在下图x64/Release目次下
https://i-blog.csdnimg.cn/direct/d6ebe39abdc943e9ae5f1a20ae2d1ff9.png
附加依赖项到场：librdkafka.lib;librdkafkacpp.lib，如下图：
https://i-blog.csdnimg.cn/direct/561b3c639d774f89803ba5993ce9e2d7.png
4、发布端：
将主函数的CPP文件改为：
#include <iostream>
#include <thread>
#include "rdkafkacpp.h"
int main()
{
std::string brokers = "172.18.4.96:9092";
std::string errorStr;
RdKafka::Conf *conf = RdKafka::Conf::create(RdKafka::Conf::CONF_GLOBAL);
RdKafka::Conf *tconf = RdKafka::Conf::create(RdKafka::Conf::CONF_TOPIC);
if (!conf) {
std::cout << "Create RdKafka Conf failed" << std::endl;
return -1;
}
conf->set("message.max.bytes", "10240000", errorStr); //最大字节数
conf->set("replica.fetch.max.bytes", "20485760", errorStr);
conf->set("bootstrap.servers", brokers, errorStr);
RdKafka::Producer *producer = RdKafka::Producer::create(conf, errorStr);
if (!producer) {
std::cout << "Create Producer failed" << std::endl;
return -1;
}
//创建Topic
RdKafka::Topic *topic = RdKafka::Topic::create(producer, "koala-stqf-03", tconf, errorStr);
if (!topic) {
std::cout << "Create Topic failed" << std::endl;
}
int count = 0;
while (true)
{ //发送消息
RdKafka::ErrorCode resCode = producer->produce(topic, RdKafka::Topic::PARTITION_UA, RdKafka::Producer::RK_MSG_COPY, (char *)"123456789", 10, nullptr, nullptr);
std::cout << "Count:" << count << ",has publish:" << (char *)"123456789" << std::endl;
if (resCode != RdKafka::ERR_NO_ERROR) {
std::cerr << "Produce failed: " << RdKafka::err2str(resCode) << std::endl;
}
count += 1;
std::this_thread::sleep_for(std::chrono::seconds(1));
}
delete conf;
delete tconf;
delete topic;
delete producer;
RdKafka::wait_destroyed(5000);
return 0;
}
5、订阅端
新建一个同样的订阅端工程，同样将主函数的代码改为：
#include "rdkafkacpp.h"
#include <chrono>
#include <time.h>
#include <sstream>
#include <iomanip>
#include <iostream>
#include <algorithm>
#include <iterator>
void consume_cb(RdKafka::Message &message, void *opaque)
{
switch (message.err()) {
case RdKafka::ERR__TIMED_OUT:
std::cout << "RdKafka::ERR__TIMED_OUT" << std::endl;
break;
case RdKafka::ERR_NO_ERROR:
/* Real message */
RdKafka::MessageTimestamp ts;
ts = message.timestamp();
if (ts.type != RdKafka::MessageTimestamp::MSG_TIMESTAMP_NOT_AVAILABLE) {
std::string timeprefix;
if (ts.type == RdKafka::MessageTimestamp::MSG_TIMESTAMP_CREATE_TIME) {
timeprefix = "created time";
}
else if (ts.type == RdKafka::MessageTimestamp::MSG_TIMESTAMP_LOG_APPEND_TIME) {
timeprefix = "log append time";
}
unsigned long long milli = ts.timestamp + (unsigned long long)8 * 60 * 60 * 1000;//此处转化为东八区北京时间，如果是其它时区需要按需求修改
auto mTime = std::chrono::milliseconds(milli);
auto tp = std::chrono::time_point<std::chrono::system_clock, std::chrono::milliseconds>(mTime);
auto tt = std::chrono::system_clock::to_time_t(tp);
tm timeinfo;
::gmtime_s(&timeinfo, &tt);
//char s{ 0 };
//::sprintf(s, "%04d-%02d-%02d %02d:%02d:%02d", timeinfo.tm_year + 1900, timeinfo.tm_mon + 1, timeinfo.tm_mday, timeinfo.tm_hour, timeinfo.tm_min, timeinfo.tm_sec);
// std::cout << timeinfo.tm_year + 1900 << "-" << timeinfo.tm_mon + 1 << "-" << timeinfo.tm_mday << " " << timeinfo.tm_hour << ":" << timeinfo.tm_min << ":" << timeinfo.tm_sec << std::endl;
#if 0
std::stringstream ss;
std::string dateStr;
ss << timeinfo.tm_year + 1900 << "-"
<< timeinfo.tm_mon + 1 << "-"
<< timeinfo.tm_mday;
ss >> dateStr;
ss.clear();
ss << timeinfo.tm_hour << ":"
<< timeinfo.tm_min << ":"
<< timeinfo.tm_sec;
std::string timeStr;
ss >> timeStr;
std::string dateTimeStr;
dateTimeStr += dateStr;
dateTimeStr.push_back(' ');
dateTimeStr += timeStr;
#endif // 0
//std::cout << "TimeStamp" << timeprefix << " " << s << std::endl;
std::cout << "TimeStamp " << timeinfo.tm_year + 1900 << "-" << timeinfo.tm_mon + 1 << "-" << timeinfo.tm_mday << " " << timeinfo.tm_hour << ":" << timeinfo.tm_min << ":" << timeinfo.tm_sec << std::endl;
}
std::cout << message.topic_name() << " offset" << message.offset() << "partion " << message.partition() << " message: " << reinterpret_cast<char*>(message.payload()) << std::endl;
break;
case RdKafka::ERR__PARTITION_EOF:
/* Last message */
std::cout << "EOF reached for" << std::endl;
break;
case RdKafka::ERR__UNKNOWN_TOPIC:
case RdKafka::ERR__UNKNOWN_PARTITION:
std::cout << "Consume failed: " << message.errstr();
break;
default:
/* Errors */
std::cout << "Consume failed: " << message.errstr();
break;
}
}
int main()
{
std::string brokers = "172.18.4.96:9092";
std::string errstr;
std::vector<std::string> topics{ "koala-stqf-03",
"klai-seim-alert-koala-test-03"
};
std::string group_id = "whl-consumer-group";
RdKafka::Conf *conf = RdKafka::Conf::create(RdKafka::Conf::CONF_GLOBAL);
if (conf->set("group.id", group_id, errstr)) {
std::cout << errstr << std::endl;
return -1;
}
conf->set("bootstrap.servers", brokers, errstr);
conf->set("max.partition.fetch.bytes", "1024000", errstr);
//conf->set("enable-auto-commit", "true", errstr);
RdKafka::Conf *tconf = RdKafka::Conf::create(RdKafka::Conf::CONF_TOPIC);
tconf->set("auto.offset.reset", "latest", errstr);
conf->set("default_topic_conf", tconf, errstr);
RdKafka::KafkaConsumer *m_consumer = RdKafka::KafkaConsumer::create(conf, errstr);
if (!m_consumer) {
std::cout << "failed to create consumer " << errstr << std::endl;
return -1;
}
#if 0 //从上一次消费结束的位置开始消费
RdKafka::ErrorCode err = m_consumer->subscribe(topics);
if (err != RdKafka::ERR_NO_ERROR) {
std::cout << RdKafka::err2str(err) << std::endl;
return -1;
}
#else //指定每个topic的每个分区开始消费的位置
//基本思路为先获取server端的状态信息，将与订阅相关的topic找出来，根据分区，创建TopicPartion；最后使用assign消费
RdKafka::Metadata *metadataMap{ nullptr };
RdKafka::ErrorCode err = m_consumer->metadata(true, nullptr, &metadataMap, 2000);
if (err != RdKafka::ERR_NO_ERROR) {
std::cout << RdKafka::err2str(err) << std::endl;
}
const RdKafka::Metadata::TopicMetadataVector *topicList = metadataMap->topics();
std::cout << "broker topic size: " << topicList->size() << std::endl;
RdKafka::Metadata::TopicMetadataVector subTopicMetaVec;
std::copy_if(topicList->begin(), topicList->end(), std::back_inserter(subTopicMetaVec), [&topics](const RdKafka::TopicMetadata* data) {
return std::find_if(topics.begin(), topics.end(), (const std::string &tname) {return data->topic() == tname; }) != topics.end();
});
std::vector<RdKafka::TopicPartition*> topicpartions;
std::for_each(subTopicMetaVec.begin(), subTopicMetaVec.end(), [&topicpartions](const RdKafka::TopicMetadata* data) {
auto parVec = data->partitions();
std::for_each(parVec->begin(), parVec->end(), [&](const RdKafka::PartitionMetadata *value) {
std::cout << data->topic() << " has partion: " << value->id() << " Leader is : " << value->leader() << std::endl;
topicpartions.push_back(RdKafka::TopicPartition::create(data->topic(), value->id(), RdKafka::Topic::OFFSET_END));
});
});
m_consumer->assign(topicpartions);
#endif // 0
RdKafka::ErrorCode errccc = m_consumer->subscribe(topics);
if (errccc != RdKafka::ERR_NO_ERROR) {
std::cout << RdKafka::err2str(errccc) << std::endl;
return -1;
}
while (true)
{
RdKafka::Message *msg = m_consumer->consume(6000);
consume_cb(*msg, nullptr); //消息一条消息
delete msg;
}
return 0;
}
6、发布 订阅展示：
https://i-blog.csdnimg.cn/direct/bb6d053793b24619a73c83a50dddc0d1.png
免责声明：如果侵犯了您的权益，请联系站长，我们会及时删除侵权内容，谢谢合作！更多信息从访问主页：qidao123.com:ToB企服之家，中国第一个企服评测及商务社交产业平台。
页:
[1]