一文带你明确透MyBatis源码
本文分享自华为云社区《一文彻底吃透MyBatis源码！！》，作者：冰 河。写在前面
随着互联网的发展，越来越多的公司摒弃了Hibernate，而选择拥抱了MyBatis。而且，很多大厂在口试的时候喜欢问MyBatis底层的原理和源码实现。总之，MyBatis险些成为了Java开辟人员必须深入掌握的框架技术，今天，我们就一起来深入分析MyBatis源码。文章有点长，建议先收藏后慢慢研究。团体三万字左右，全程高能，小同伴们可慢慢研究。
MyBatis源码解析
大家应该都知道Mybatis源码也是对Jbdc的再一次封装,不管怎么进行包装,照旧会有获取链接、preparedStatement、封装参数、执行这些步骤的。
配置解析过程
String resource = "mybatis-config.xml";
//1.读取resources下面的mybatis-config.xml文件
InputStream inputStream = Resources.getResourceAsStream(resource);
//2.使用SqlSessionFactoryBuilder创建SqlSessionFactory
SqlSessionFactory sqlSessionFactory = new SqlSessionFactoryBuilder().build(inputStream);
//3.通过sqlSessionFactory创建SqlSession
SqlSession sqlSession = sqlSessionFactory.openSession();Resources.getResourceAsStream(resource)读取文件
public static InputStream getResourceAsStream(String resource) throws IOException {
return getResourceAsStream(null, resource);
}
//loader赋值为null
public static InputStream getResourceAsStream(ClassLoader loader, String resource) throws IOException {
InputStream in = classLoaderWrapper.getResourceAsStream(resource, loader);
if (in == null) {
throw new IOException("Could not find resource " + resource);
}
return in;
}
//classLoader为null
public InputStream getResourceAsStream(String resource, ClassLoader classLoader) {
return getResourceAsStream(resource, getClassLoaders(classLoader));
}
//classLoader类加载
InputStream getResourceAsStream(String resource, ClassLoader[] classLoader) {
for (ClassLoader cl : classLoader) {
if (null != cl) {
//加载指定路径文件流
InputStream returnValue = cl.getResourceAsStream(resource);
// now, some class loaders want this leading "/", so we'll add it and try again if we didn't find the resource
if (null == returnValue) {
returnValue = cl.getResourceAsStream("/" + resource);
}
if (null != returnValue) {
return returnValue;
}
}
}
return null;
}总结：重要是通过ClassLoader.getResourceAsStream()方法获取指定的classpath路径下的Resource 。
通过SqlSessionFactoryBuilder创建SqlSessionFactory
//SqlSessionFactoryBuilder是一个建造者模式
SqlSessionFactory sqlSessionFactory = new SqlSessionFactoryBuilder().build(inputStream);
public SqlSessionFactory build(InputStream inputStream) {
return build(inputStream, null, null);
}
//XMLConfigBuilder也是建造者模式
public SqlSessionFactory build(InputStream inputStream, String environment, Properties properties) {
try {
XMLConfigBuilder parser = new XMLConfigBuilder(inputStream, environment, properties);
return build(parser.parse());
} catch (Exception e) {
throw ExceptionFactory.wrapException("Error building SqlSession.", e);
} finally {
ErrorContext.instance().reset();
try {
inputStream.close();
} catch (IOException e) {
// Intentionally ignore. Prefer previous error.
}
}
}
//接下来进入XMLConfigBuilder构造函数
public XMLConfigBuilder(InputStream inputStream, String environment, Properties props) {
this(new XPathParser(inputStream, true, props, new XMLMapperEntityResolver()), environment, props);
}
//接下来进入this后,初始化Configuration
private XMLConfigBuilder(XPathParser parser, String environment, Properties props) {
super(new Configuration());
ErrorContext.instance().resource("SQL Mapper Configuration");
this.configuration.setVariables(props);
this.parsed = false;
this.environment = environment;
this.parser = parser;
}
//其中parser.parse()负责解析xml,build(configuration)创建SqlSessionFactory
return build(parser.parse());parser.parse()解析xml
public Configuration parse() {
//判断是否重复解析
if (parsed) {
throw new BuilderException("Each XMLConfigBuilder can only be used once.");
}
parsed = true;
//读取配置文件一级节点configuration
parseConfiguration(parser.evalNode("/configuration"));
return configuration;
}private void parseConfiguration(XNode root) {
try {
//properties 标签,用来配置参数信息，比如最常见的数据库连接信息
propertiesElement(root.evalNode("properties"));
Properties settings = settingsAsProperties(root.evalNode("settings"));
loadCustomVfs(settings);
loadCustomLogImpl(settings);
//实体别名两种方式:1.指定单个实体;2.指定包
typeAliasesElement(root.evalNode("typeAliases"));
//插件
pluginElement(root.evalNode("plugins"));
//用来创建对象(数据库数据映射成java对象时)
objectFactoryElement(root.evalNode("objectFactory"));
objectWrapperFactoryElement(root.evalNode("objectWrapperFactory"));
reflectorFactoryElement(root.evalNode("reflectorFactory"));
settingsElement(settings);
// read it after objectFactory and objectWrapperFactory issue #631
//数据库环境
environmentsElement(root.evalNode("environments"));
databaseIdProviderElement(root.evalNode("databaseIdProvider"));
//数据库类型和Java数据类型的转换
typeHandlerElement(root.evalNode("typeHandlers"));
//这个是对数据库增删改查的解析
mapperElement(root.evalNode("mappers"));
} catch (Exception e) {
throw new BuilderException("Error parsing SQL Mapper Configuration. Cause: " + e, e);
}
}总结:parseConfiguration完成的是解析configuration下的标签
private void mapperElement(XNode parent) throws Exception {
if (parent != null) {
for (XNode child : parent.getChildren()) {
//解析<package name=""/>
if ("package".equals(child.getName())) {
String mapperPackage = child.getStringAttribute("name");
//包路径存到mapperRegistry中
configuration.addMappers(mapperPackage);
} else {
//解析<mapper url=""resource=""></mapper>
String resource = child.getStringAttribute("resource");
String url = child.getStringAttribute("url");
String mapperClass = child.getStringAttribute("class");
if (resource != null && url == null && mapperClass == null) {
ErrorContext.instance().resource(resource);
//读取Mapper.xml文件
InputStream inputStream = Resources.getResourceAsStream(resource);
XMLMapperBuilder mapperParser = new XMLMapperBuilder(inputStream,
configuration, resource, configuration.getSqlFragments());
mapperParser.parse();
} else if (resource == null && url != null && mapperClass == null) {
ErrorContext.instance().resource(url);
InputStream inputStream = Resources.getUrlAsStream(url);
XMLMapperBuilder mapperParser = new XMLMapperBuilder(inputStream,
configuration, url, configuration.getSqlFragments());
mapperParser.parse();
} else if (resource == null && url == null && mapperClass != null) {
Class<?> mapperInterface = Resources.classForName(mapperClass);
configuration.addMapper(mapperInterface);
} else {
throw new BuilderException("A mapper element may only specify a url, resource or class, but not more than one.");
}
}
}
}
}总结: 通过解析configuration.xml文件,获取此中的Environment、Setting,紧张的是将下的所有解析出来之后添加到
Configuration,Configuration雷同于配置中心,所有的配置信息都在这里。
mapperParser.parse()对 Mapper 映射器的解析
public void parse() {
if (!configuration.isResourceLoaded(resource)) {
//解析所有的子标签
configurationElement(parser.evalNode("/mapper"));
configuration.addLoadedResource(resource);
//把namespace（接口类型）和工厂类绑定起来
bindMapperForNamespace();
}
parsePendingResultMaps();
parsePendingCacheRefs();
parsePendingStatements();
}
//这里面解析的是Mapper.xml的标签
private void configurationElement(XNode context) {
try {
String namespace = context.getStringAttribute("namespace");
if (namespace == null || namespace.equals("")) {
throw new BuilderException("Mapper's namespace cannot be empty");
}
builderAssistant.setCurrentNamespace(namespace);
//对其他命名空间缓存配置的引用
cacheRefElement(context.evalNode("cache-ref"));
//对给定命名空间的缓存配置
cacheElement(context.evalNode("cache"));
parameterMapElement(context.evalNodes("/mapper/parameterMap"));
//是最复杂也是最强大的元素，用来描述如何从数据库结果集中来加载对象
resultMapElements(context.evalNodes("/mapper/resultMap"));
//可被其他语句引用的可重用语句块
sqlElement(context.evalNodes("/mapper/sql"));
//获得MappedStatement对象(增删改查标签)
buildStatementFromContext(context.evalNodes("select|insert|update|delete"));
} catch (Exception e) {
throw new BuilderException("Error parsing Mapper XML. The XML location is '" + resource + "'. Cause: " + e, e);
}
}
//获得MappedStatement对象(增删改查标签)
private void buildStatementFromContext(List<XNode> list) {
if (configuration.getDatabaseId() != null) {
buildStatementFromContext(list, configuration.getDatabaseId());
}
buildStatementFromContext(list, null);
}
//获得MappedStatement对象(增删改查标签)
private void buildStatementFromContext(List<XNode> list, String requiredDatabaseId) {
//循环增删改查标签
for (XNode context : list) {
final XMLStatementBuilder statementParser = new XMLStatementBuilder(configuration, builderAssistant, context, requiredDatabaseId);
try {
//解析insert/update/select/del中的标签
statementParser.parseStatementNode();
} catch (IncompleteElementException e) {
configuration.addIncompleteStatement(statementParser);
}
}
}
public void parseStatementNode() {
//在命名空间中唯一的标识符,可以被用来引用这条语句
String id = context.getStringAttribute("id");
//数据库厂商标识
String databaseId = context.getStringAttribute("databaseId");
if (!databaseIdMatchesCurrent(id, databaseId, this.requiredDatabaseId)) {
return;
}
String nodeName = context.getNode().getNodeName();
SqlCommandType sqlCommandType =
SqlCommandType.valueOf(nodeName.toUpperCase(Locale.ENGLISH));
boolean isSelect = sqlCommandType == SqlCommandType.SELECT;
//flushCache和useCache都和二级缓存有关
//将其设置为true后,只要语句被调用,都会导致本地缓存和二级缓存被清空,默认值:false
boolean flushCache = context.getBooleanAttribute("flushCache", !isSelect);
//将其设置为 true 后，将会导致本条语句的结果被二级缓存缓存起来，默认值：对 select 元素为 true
boolean useCache = context.getBooleanAttribute("useCache", isSelect);
boolean resultOrdered = context.getBooleanAttribute("resultOrdered", false);
// Include Fragments before parsing
XMLIncludeTransformer includeParser = new XMLIncludeTransformer(configuration, builderAssistant);
includeParser.applyIncludes(context.getNode());
//会传入这条语句的参数类的完全限定名或别名
String parameterType = context.getStringAttribute("parameterType");
Class<?> parameterTypeClass = resolveClass(parameterType);
String lang = context.getStringAttribute("lang");
LanguageDriver langDriver = getLanguageDriver(lang);
// Parse selectKey after includes and remove them.
processSelectKeyNodes(id, parameterTypeClass, langDriver);
// Parse the SQL (pre: <selectKey> and <include> were parsed and removed)
KeyGenerator keyGenerator;
String keyStatementId = id + SelectKeyGenerator.SELECT_KEY_SUFFIX;
keyStatementId = builderAssistant.applyCurrentNamespace(keyStatementId, true);
if (configuration.hasKeyGenerator(keyStatementId)) {
keyGenerator = configuration.getKeyGenerator(keyStatementId);
} else {
keyGenerator = context.getBooleanAttribute("useGeneratedKeys", configuration.isUseGeneratedKeys() && SqlCommandType.INSERT.equals(sqlCommandType)) ? Jdbc3KeyGenerator.INSTANCE : NoKeyGenerator.INSTANCE;
}
SqlSource sqlSource = langDriver.createSqlSource(configuration, context, parameterTypeClass);
StatementType statementType =
StatementType.valueOf(context.getStringAttribute("statementType",
StatementType.PREPARED.toString()));
Integer fetchSize = context.getIntAttribute("fetchSize");
Integer timeout = context.getIntAttribute("timeout");
String parameterMap = context.getStringAttribute("parameterMap");
//从这条语句中返回的期望类型的类的完全限定名或别名
String resultType = context.getStringAttribute("resultType");
Class<?> resultTypeClass = resolveClass(resultType);
//外部resultMap的命名引用
String resultMap = context.getStringAttribute("resultMap");
String resultSetType = context.getStringAttribute("resultSetType");
ResultSetType resultSetTypeEnum = resolveResultSetType(resultSetType);
String keyProperty = context.getStringAttribute("keyProperty");
String keyColumn = context.getStringAttribute("keyColumn");
String resultSets = context.getStringAttribute("resultSets");
builderAssistant.addMappedStatement(id, sqlSource, statementType, sqlCommandType,
fetchSize, timeout, parameterMap, parameterTypeClass, resultMap, resultTypeClass,
resultSetTypeEnum, flushCache, useCache, resultOrdered,
keyGenerator, keyProperty, keyColumn, databaseId, langDriver, resultSets);
}
public MappedStatement addMappedStatement(
String id,
SqlSource sqlSource,
StatementType statementType,
SqlCommandType sqlCommandType,
Integer fetchSize,
Integer timeout,
String parameterMap,
Class<?> parameterType,
String resultMap,
Class<?> resultType,
ResultSetType resultSetType,
boolean flushCache,
boolean useCache,
boolean resultOrdered,
KeyGenerator keyGenerator,
String keyProperty,
String keyColumn,
String databaseId,
LanguageDriver lang,
String resultSets) {
if (unresolvedCacheRef) {
throw new IncompleteElementException("Cache-ref not yet resolved");
}
id = applyCurrentNamespace(id, false);
boolean isSelect = sqlCommandType == SqlCommandType.SELECT;
MappedStatement.Builder statementBuilder = new MappedStatement.Builder(configuration,
id, sqlSource, sqlCommandType)
.resource(resource)
.fetchSize(fetchSize)
.timeout(timeout)
.statementType(statementType)
.keyGenerator(keyGenerator)
.keyProperty(keyProperty)
.keyColumn(keyColumn)
.databaseId(databaseId)
.lang(lang)
.resultOrdered(resultOrdered)
.resultSets(resultSets)
.resultMaps(getStatementResultMaps(resultMap, resultType, id))
.resultSetType(resultSetType)
.flushCacheRequired(valueOrDefault(flushCache, !isSelect))
.useCache(valueOrDefault(useCache, isSelect))
.cache(currentCache);
ParameterMap statementParameterMap = getStatementParameterMap(parameterMap,
parameterType, id);
if (statementParameterMap != null) {
statementBuilder.parameterMap(statementParameterMap);
}
MappedStatement statement = statementBuilder.build();
//持有在configuration中
configuration.addMappedStatement(statement);
return statement;
}
public void addMappedStatement(MappedStatement ms){
//ms.getId = mapper.UserMapper.getUserById
//ms = MappedStatement等于每一个增删改查的标签的里的数据
mappedStatements.put(ms.getId(), ms);
}
//最终存放到mappedStatements中,mappedStatements存放的是一个个的增删改查
protected final Map<String, MappedStatement> mappedStatements = new StrictMap<MappedStatement>("Mapped Statements collection").conflictMessageProducer((savedValue, targetValue) ->
". please check " + savedValue.getResource() + " and " + targetValue.getResource());解析bindMapperForNamespace()方法
把 namespace（接口范例）和工厂类绑定起来
private void bindMapperForNamespace() {
//当前Mapper的命名空间
String namespace = builderAssistant.getCurrentNamespace();
if (namespace != null) {
Class<?> boundType = null;
try {
//interface mapper.UserMapper这种
boundType = Resources.classForName(namespace);
} catch (ClassNotFoundException e) {
}
if (boundType != null) {
if (!configuration.hasMapper(boundType)) {
configuration.addLoadedResource("namespace:" + namespace);
configuration.addMapper(boundType);
}
}
}
}
public <T> void addMapper(Class<T> type) {
mapperRegistry.addMapper(type);
}
public <T> void addMapper(Class<T> type) {
if (type.isInterface()) {
if (hasMapper(type)) {
throw new BindingException("Type " + type + " is already known to the MapperRegistry.");
}
boolean loadCompleted = false;
try {
//接口类型(key)->工厂类
knownMappers.put(type, new MapperProxyFactory<>(type));
MapperAnnotationBuilder parser = new MapperAnnotationBuilder(config, type);
parser.parse();
loadCompleted = true;
} finally {
if (!loadCompleted) {
knownMappers.remove(type);
}
}
}
}生成SqlSessionFactory对象
XMLMapperBuilder.parse()方法,是对 Mapper 映射器的解析里面有两个方法：
（1）configurationElement()解析所有的子标签,最终解析Mapper.xml中的insert/update/delete/select标签的id(全路径)构成key和整个标签和数据连接构成MappedStatement存放到Configuration中的 mappedStatements这个map里面。
（2）bindMapperForNamespace()是把接口范例(interface mapper.UserMapper)和工厂类存到放MapperRegistry中的knownMappers里面。
SqlSessionFactory的创建
public SqlSessionFactory build(Configuration config) {
return new DefaultSqlSessionFactory(config);
}直接把Configuration当做参数,直接new一个DefaultSqlSessionFactory。
SqlSession会话的创建过程
mybatis操作的时候跟数据库的每一次连接,都需要创建一个会话,我们用openSession()方法来创建。这个会话里面需要包含一个Executor用来执行 SQL。Executor又要指定事务范例和执行器的范例。
创建Transaction(两种方式)
https://mp.toutiao.com/mp/agw/article_material/open_image/get?code=MDExMmY4Yjc1N2Q5ZWVhM2FlOTUxMjQ1NTNhZmRkMGMsMTcxNzM4MjU4NjAyNw==
[*]如果配置的是 JDBC,则会利用Connection 对象的 commit()、rollback()、close()管理事务。
[*]如果配置成MANAGED,会把事务交给容器来管理,比如 JBOSS,Weblogic。
SqlSession sqlSession = sqlSessionFactory.openSession();public SqlSession openSession() {
//configuration中有默认赋值protected ExecutorType defaultExecutorType = ExecutorType.SIMPLE
return openSessionFromDataSource(configuration.getDefaultExecutorType(), null, false);
}
<environments default="development">
<environment id="development">
<transactionManager type="JDBC"/>
<dataSource type="POOLED">
<property name="driver" value="${driver}"/>
<property name="url" value="${url}"/>
<property name="username" value="${username}"/>
<property name="password" value="${password}"/>
</dataSource>
</environment>
</environments>创建Executor
//ExecutorType是SIMPLE,一共有三种SIMPLE(SimpleExecutor)、REUSE(ReuseExecutor)、BATCH(BatchExecutor)
private SqlSession openSessionFromDataSource(ExecutorType execType, TransactionIsolationLevel level, boolean autoCommit) {
Transaction tx = null;
try {
//xml中的development节点
final Environment environment = configuration.getEnvironment();
//type配置的是Jbdc所以生成的是JbdcTransactionFactory工厂类
final TransactionFactory transactionFactory = getTransactionFactoryFromEnvironment(environment);
//Jdbc生成JbdcTransactionFactory生成JbdcTransaction
tx = transactionFactory.newTransaction(environment.getDataSource(), level, autoCommit);
//创建CachingExecutor执行器
final Executor executor = configuration.newExecutor(tx, execType);
//创建DefaultSqlSession属性包括 Configuration、Executor对象
return new DefaultSqlSession(configuration, executor, autoCommit);
} catch (Exception e) {
closeTransaction(tx); // may have fetched a connection so lets call
close()
throw ExceptionFactory.wrapException("Error opening session. Cause: " + e, e);
} finally {
ErrorContext.instance().reset();
}
}得到Mapper对象
UserMapper userMapper = sqlSession.getMapper(UserMapper.class);
public <T> T getMapper(Class<T> type) {
return configuration.getMapper(type, this);
}mapperRegistry.getMapper是从MapperRegistry的knownMappers里面取的,knownMappers里面存的是接口范例(interface mapper.UserMapper)和工厂类(MapperProxyFactory)。
public <T> T getMapper(Class<T> type, SqlSession sqlSession) {
return mapperRegistry.getMapper(type, sqlSession);
}从knownMappers的Map里根据接口范例(interface mapper.UserMapper)取出对应的工厂类。
public <T> T getMapper(Class<T> type, SqlSession sqlSession) {
final MapperProxyFactory<T> mapperProxyFactory = (MapperProxyFactory<T>)
knownMappers.get(type);
if (mapperProxyFactory == null) {
throw new BindingException("Type " + type + " is not known to the MapperRegistry.");
}
try {
return mapperProxyFactory.newInstance(sqlSession);
} catch (Exception e) {
throw new BindingException("Error getting mapper instance. Cause: " + e, e);
}
}
public T newInstance(SqlSession sqlSession) {
final MapperProxy<T> mapperProxy = new MapperProxy<>(sqlSession, mapperInterface, methodCache);
return newInstance(mapperProxy);
}这里通过JDK动态署理返回署理对象MapperProxy(org.apache.ibatis.binding.MapperProxy@6b2ea799)
protected T newInstance(MapperProxy<T> mapperProxy) {
//mapperInterface是interface mapper.UserMapper
return (T) Proxy.newProxyInstance(mapperInterface.getClassLoader(), new
Class[] { mapperInterface }, mapperProxy);
}
UserMapper userMapper = sqlSession.getMapper(UserMapper.class);执行SQL
User user = userMapper.getUserById(1);调用invoke署理方法
由于所有的 Mapper 都是 MapperProxy 署理对象，所以恣意的方法都是执行MapperProxy 的invoke()方法
public Object invoke(Object proxy, Method method, Object[] args) throws Throwable {
try {
//判断是否需要去执行SQL还是直接执行方法
if (Object.class.equals(method.getDeclaringClass())) {
return method.invoke(this, args);
//这里判断的是接口中的默认方法Default等
} else if (isDefaultMethod(method)) {
return invokeDefaultMethod(proxy, method, args);
}
} catch (Throwable t) {
throw ExceptionUtil.unwrapThrowable(t);
}
//获取缓存,保存了方法签名和接口方法的关系
final MapperMethod mapperMethod = cachedMapperMethod(method);
return mapperMethod.execute(sqlSession, args);
}调用execute方法
这里利用的例子用的是查询所以走的是else分支语句。
public Object execute(SqlSession sqlSession, Object[] args) {
Object result;
//根据命令类型走不行的操作command.getType()是select
switch (command.getType()) {
case INSERT: {
Object param = method.convertArgsToSqlCommandParam(args);
result = rowCountResult(sqlSession.insert(command.getName(), param));
break;
}
case UPDATE: {
Object param = method.convertArgsToSqlCommandParam(args);
result = rowCountResult(sqlSession.update(command.getName(), param));
break;
}
case DELETE: {
Object param = method.convertArgsToSqlCommandParam(args);
result = rowCountResult(sqlSession.delete(command.getName(), param));
break;
}
case SELECT:
if (method.returnsVoid() && method.hasResultHandler()) {
executeWithResultHandler(sqlSession, args);
result = null;
} else if (method.returnsMany()) {
result = executeForMany(sqlSession, args);
} else if (method.returnsMap()) {
result = executeForMap(sqlSession, args);
} else if (method.returnsCursor()) {
result = executeForCursor(sqlSession, args);
} else {
//将参数转换为SQL的参数
Object param = method.convertArgsToSqlCommandParam(args);
result = sqlSession.selectOne(command.getName(), param);
if (method.returnsOptional()
&& (result == null ||
!method.getReturnType().equals(result.getClass()))) {
result = Optional.ofNullable(result);
}
}
break;
case FLUSH:
result = sqlSession.flushStatements();
break;
default:
throw new BindingException("Unknown execution method for: " + command.getName());
}
if (result == null && method.getReturnType().isPrimitive() && !method.returnsVoid()) {
throw new BindingException("Mapper method '" + command.getName() + " attempted to return null from a method with a primitive return type (" + method.getReturnType() + ").");
}
return result;
}调用selectOne实在是selectList
selectOne查询一个和查询多个实在是一样的。
public <T> T selectOne(String statement, Object parameter) {
// Popular vote was to return null on 0 results and throw exception on too many.
List<T> list = this.selectList(statement, parameter);
if (list.size() == 1) {
return list.get(0);
} else if (list.size() > 1) {
throw new TooManyResultsException("Expected one result (or null) to be returned by selectOne(), but found: " + list.size());
} else {
return null;
}
}
public <E> List<E> selectList(String statement, Object parameter, RowBounds rowBounds) {
try {
//从Configuration里的mappedStatements里根据key(id的全路径)获取MappedStatement 对象
MappedStatement ms = configuration.getMappedStatement(statement);
return executor.query(ms, wrapCollection(parameter), rowBounds, Executor.NO_RESULT_HANDLER);
} catch (Exception e) {
throw ExceptionFactory.wrapException("Error querying database. Cause: " + e, e);
} finally {
ErrorContext.instance().reset();
}
}mappedStatements对象如图
https://bbs-img.huaweicloud.com/blogs/img/20240531/1717116875885701560.jpg
MappedStatement对象如图
https://bbs-img.huaweicloud.com/blogs/img/20240531/1717116895029436503.jpg
执行query方法
创建CacheKey
从 BoundSql 中获取SQL信息,创建 CacheKey。这个CacheKey就是缓存的Key。
public <E> List<E> query(MappedStatement ms, Object parameterObject, RowBounds rowBounds, ResultHandler resultHandler) throws SQLException {
//创建缓存Key
BoundSql boundSql = ms.getBoundSql(parameterObject);
//key = -575461213:-771016147:mapper.UserMapper.getUserById:0:2147483647:select * from test_user where id = ?:1:development
CacheKey key = createCacheKey(ms, parameterObject, rowBounds, boundSql);
return query(ms, parameterObject, rowBounds, resultHandler, key, boundSql);
}
public <E> List<E> query(MappedStatement ms, Object parameterObject, RowBounds rowBounds, ResultHandler resultHandler, CacheKey key, BoundSql boundSql) throws SQLException {
Cache cache = ms.getCache();
if (cache != null) {
flushCacheIfRequired(ms);
if (ms.isUseCache() && resultHandler == null) {
ensureNoOutParams(ms, boundSql);
@SuppressWarnings("unchecked")
List<E> list = (List<E>) tcm.getObject(cache, key);
if (list == null) {
list = delegate.query(ms, parameterObject, rowBounds, resultHandler, key, boundSql);
tcm.putObject(cache, key, list); // issue #578 and #116
}
return list;
}
}
return delegate.query(ms, parameterObject, rowBounds, resultHandler, key, boundSql);
}清空当地缓存
public <E> List<E> query(MappedStatement ms, Object parameter, RowBounds rowBounds, ResultHandler resultHandler, CacheKey key, BoundSql boundSql) throws SQLException {
ErrorContext.instance().resource(ms.getResource()).activity("executing a query").object(ms.getId());
if (closed) {
throw new ExecutorException("Executor was closed.");
}
//queryStack 用于记录查询栈，防止递归查询重复处理缓存
//flushCache=true 的时候，会先清理本地缓存（一级缓存）
if (queryStack == 0 && ms.isFlushCacheRequired()) {
//清空本地缓存
clearLocalCache();
}
List<E> list;
try {
queryStack++;
list = resultHandler == null ? (List<E>) localCache.getObject(key) : null;
if (list != null) {
handleLocallyCachedOutputParameters(ms, key, parameter, boundSql);
} else {
//如果没有缓存,会从数据库查询：queryFromDatabase()
list = queryFromDatabase(ms, parameter, rowBounds, resultHandler, key, boundSql);
}
} finally {
queryStack--;
}
if (queryStack == 0) {
for (DeferredLoad deferredLoad : deferredLoads) {
deferredLoad.load();
}
// issue #601
deferredLoads.clear();
//如果 LocalCacheScope == STATEMENT,会清理本地缓存
if (configuration.getLocalCacheScope() == LocalCacheScope.STATEMENT) {
// issue #482
clearLocalCache();
}
}
return list;
}从数据库查询
private <E> List<E> queryFromDatabase(MappedStatement ms, Object parameter, RowBounds rowBounds, ResultHandler resultHandler, CacheKey key, BoundSql boundSql) throws SQLException {
List<E> list;
//先在缓存用占位符占位
localCache.putObject(key, EXECUTION_PLACEHOLDER);
try {
//执行Executor 的 doQuery(),默认是SimpleExecutor
list = doQuery(ms, parameter, rowBounds, resultHandler, boundSql);
} finally {
//执行查询后,移除占位符
localCache.removeObject(key);
}
//从新放入数据
localCache.putObject(key, list);
if (ms.getStatementType() == StatementType.CALLABLE) {
localOutputParameterCache.putObject(key, parameter);
}
return list;
}执行doQuery
public <E> List<E> doQuery(MappedStatement ms, Object parameter, RowBounds rowBounds, ResultHandler resultHandler, BoundSql boundSql) throws SQLException {
Statement stmt = null;
try {
Configuration configuration = ms.getConfiguration();
StatementHandler handler = configuration.newStatementHandler(wrapper, ms, parameter, rowBounds, resultHandler, boundSql);
stmt = prepareStatement(handler, ms.getStatementLog());
return handler.query(stmt, resultHandler);
} finally {
closeStatement(stmt);
}
}源码总结
总体上来说，MyBatis的源码照旧比力简朴的，只要大家踏下心来，花个两三天细致研究下，基本上都能弄明确源码的主体脉络。
点击关注，第一时间了解华为云新鲜技术~
免责声明：如果侵犯了您的权益，请联系站长，我们会及时删除侵权内容，谢谢合作！更多信息从访问主页：qidao123.com:ToB企服之家，中国第一个企服评测及商务社交产业平台。
页:
[1]