mac上，『已损坏，无法打开。 您应该将它移到废纸篓』的恶心玩意怎么解决
一、答应“任何来源”开启M1 mac打开【体系偏好设置】，选择【安全性与隐私】可以看到【任何来源】已经选定。
https://img-blog.csdnimg.cn/direct/a239c637f3924fae8c6bf5a9b8f12889.png
接着打开文件举行安装。
假如没有看到“任何来源”的选项，假如不开启“任何来源”的选项，会直接影响到无法运行的第三方应用。开启“任何来源”的方法如下：
【启动台】，选择【终端】，如下图所示：
sudo spctl--master-disable 然后回车，继续输入密码，然后回车。再重新打开【体系偏好设置】，选择【安全性与隐私】。
二、假如显示为『任何来源』但照旧显示“已损坏，无法打开。 您应该将它移到废纸篓”，要用这种方法：
打开 “访达”（Finder）进入 “应用程序” 目次，找到该软件图标，将图标拖到刚才的终端窗口里面，会得到如下组合(如图所示)：
sudo xattr -r -d com.apple.quarantine /Applications/WebStrom.app https://img-blog.csdnimg.cn/direct/ed145e28c78945b79a5a52d102f7116d.png
回到终端窗口按回车，输入体系密码回车即可。
接着重新打开安装软件，就可以正常安装了。
附：
macOS 支持使用雷同 Linux 的 API 从文件或目次中列出、 获取、设置、和删除扩展属性。在下令行中，这些能力通过xattr实用程序公开。xattr usage使用如下：
usage: xattr [-l] [-r] [-s] [-v] [-x] file
xattr -p [-l] [-r] [-s] [-v] [-x] attr_name file
xattr -w [-r] [-s] [-x] attr_name attr_value file
xattr -d [-r] [-s] attr_name file
xattr -c [-r] [-s] file
The first form lists the names of all xattrs on the given file(s).
The second form (-p) prints the value of the xattr attr_name.
The third form (-w) sets the value of the xattr attr_name to the string attr_value.
The fourth form (-d) deletes the xattr attr_name.
The fifth form (-c) deletes (clears) all xattrs.
options:
-h: print this help
-l: print long format (attr_name: attr_value and hex output has offsets and
ascii representation)
-r: act recursively
-s: act on the symbolic link itself rather than what the link points to
-v: also print filename (automatic with -r and with multiple files)
-x: attr_value is represented as a hex string for input and output man xattr下令，剖析如下：
man xattr NAME
xattr – display and manipulate extended attributes
SYNOPSIS
xattr [-lrsvx] file ...
xattr -p [-lrsvx] attr_name file ...
xattr -w [-rsx] attr_name attr_value file ...
xattr -d [-rsv] attr_name file ...
xattr -c [-rsv] file ...
xattr -h | --help
DESCRIPTION
The xattr command can be used to display, modify or remove the extended attributes of one or more files, including
directories and symbolic links.Extended attributes are arbitrary metadata stored with a file, but separate from the
filesystem attributes (such as modification time or file size).The metadata is often a null-terminated UTF-8 string,
but can also be arbitrary binary data.
One or more files may be specified on the command line.For the first two forms of the command, when there are more
than one file, the file name is displayed along with the actual results.When only one file is specified, the display
of the file name is usually suppressed (unless the -v option described below, is also specified).
In the first form of the command (without any other mode option specified), the names of all extended attributes are
listed.Attribute names can also be displayed using “ls -l@”.
In the second form, using the -p option (“print”), the value associated with the given attribute name is displayed.
Attribute values are usually displayed as strings.However, if nils are detected in the data, the value is displayed
in a hexadecimal representation.
The third form, with the -w option (“write”), causes the given attribute name to be assigned the given value.
The fourth form, with the -d option (“delete”), causes the given attribute name (and associated value), to be removed.
In the fifth form, with the -c option (“clear”), causes all attributes (including their associated values), to be
removed.
Finally, the last form, with either the -h or --help option, displays a short help message and exits immediately.
OPTIONS
-lBy default, the first two command forms either displays just the attribute names or values, respectively.The -l
option causes both the attribute names and corresponding values to be displayed.For hexadecimal display of
values, the output is preceeded with the hexadecimal offset values and followed by ASCII display, enclosed by “|”.
-rIf a file argument is a directory, act as if the entire contents of the directory recursively were also specified
(so that every file in the directory tree is acted upon).
-sIf a file argument is a symbolic link, act on the symbolic link itself, rather than the file that the symbolic
link points at.
-vForce the file name to be displayed, even for a single file.
-xForce the attribute value to be displayed in the hexadecimal representation.
The -w option normally assumes the input attribute value is a string.Specifying the -x option causes xattr to
expect the input in hexadecimal (whitespace is ignored).The xxd(1) command can be used to create hexadecimal
representations from exising binary data, to pass to xattr.
EXIT STATUS
The xattr command exits with zero status on success.On error, non-zero is returned, and an error message is printed
to the standard error.For system call errors, both the error code and error string are printed (see getxattr(2),
listxattr(2), removexattr(2) and setxattr(2) for a complete list of possible error codes).
Some attribute data may have a fixed length that is enforced by the system.For example,
% xattr -w com.apple.FinderInfo 0 foo
xattr: Result too large: 'foo'
The com.apple.FinderInfo attribute must be 32 bytes in length.
EXAMPLES
This example copies the com.apple.FinderInfo attribute from the /usr directory to the MyDir directory:
% xattr -px com.apple.FinderInfo /usr
00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
% xattr -l MyDir
% xattr -wx com.apple.FinderInfo \
"`xattr -px com.apple.FinderInfo /usr`" MyDir
% xattr -l MyDir
com.apple.FinderInfo:
0000000000 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00|........@.......|
0000001000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00|................|
00000020
SEE ALSO
ls(1), xxd(1), getxattr(2), listxattr(2), removexattr(2), setxattr(2)
macOS 13.5 November 29, 2010
免责声明：如果侵犯了您的权益，请联系站长，我们会及时删除侵权内容，谢谢合作！更多信息从访问主页：qidao123.com:ToB企服之家，中国第一个企服评测及商务社交产业平台。
页:
[1]