Linux 摆设docker+open-webui实践 - ToB企服应用市场:ToB评测及商务社交产业平台

# 将Docker放入指定文件夹并进行解压
tar -zxvf docker-20.10.10.taz(这里是你的docker安装包的名字)
# 解压之后将docker全部文件拷贝到根目录下的/usr/bin目录下
sudo cp -p docker/* /usr/bin
# 创建docker.service文件，实现开机自启动
touch docker.service
# 将以下内容粘贴到docker.service中
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target
[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
ExecStart=/usr/bin/dockerd
ExecReload=/bin/kill -s HUP $MAINPID
# Having non-zero Limit*s causes performance problems due to accounting overhead
# in the kernel. We recommend using cgroups to do container-local accounting.
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
# Uncomment TasksMax if your systemd version supports it.
# Only systemd 226 and above support this version.
#TasksMax=infinity
TimeoutStartSec=0
# set delegate yes so that systemd does not reset the cgroups of docker containers
Delegate=yes
# kill only the docker process, not all processes in the cgroup
KillMode=process
# restart the docker process if it exits prematurely
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s
[Install]
WantedBy=multi-user.target
# 把docker.service拷贝到根目录下的 /etc/systemd/system/ 目录
sudo cp docker.service /etc/systemd/system/
# 对docker.service设置权限
sudo chmod +x /etc/systemd/system/docker.service
# 重新加载某个服务的配置文件
sudo systemctl daemon-reload
# 启动docker
sudo systemctl start docker
# 查看是否安装成功
sudo docker --version

复制代码

# 进入目录
cd /usr/python3
# 解压,解压的python包是你自己的安装包名字
xz -d Python-3.11.*.tar.xz
tar -xvf Python-3.11.*.tar
# 进入解压并指明安装的Python路径
cd Python-3.11.*
./configure --prefix=/usr/local/python
#注意：需要执行命令，避免pip3 install 的时候报错没有ssl模块，其实python下面是有的，没有的话先安装：
1 yum install -y openssl-devel
2 ./configure --with-ssl
# 备注：也可直接用以下方式解决：
pip install open-webui -i http://mirrors.aliyun.com/pypi/simple --trusted-host mirrors.aliyun.com
# 编译安装
make && make install
# 软连接，便于直接用python3和pip3访问(centos7自带python2)
ln -s /usr/local/python/bin/python3.11 /usr/bin/python3
ln -s /usr/local//python/bin/pip3.11 /usr/bin/pip3
# 检测安装情况
python3 -V
pip3 -V

复制代码