思科vlan简单配置 - ToB企服应用市场:ToB评测及商务社交产业平台

Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 10 <br>Switch(config-vlan)#name IT #可以给vlan10这个分区起一个名字选做
Switch(config-vlan)#exit
Switch(config)#vlan 20
Switch(config-vlan)#exit
Switch(config)#int f0/1
Switch(config-if)#switchport access vlan 10
Switch(config-if)#int f0/2
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#do sh vlan b
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/3, Fa0/5, Fa0/6, Fa0/7
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12, Fa0/13, Fa0/14, Fa0/15
Fa0/16, Fa0/17, Fa0/18, Fa0/19
Fa0/20, Fa0/21, Fa0/22, Fa0/23
Fa0/24, Gig0/1, Gig0/2
10 IT active Fa0/1
20 USER active Fa0/2
40 VLAN0040 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
Switch(config)#int f0/4
Switch(config-if)#switchport mode trunk #配置中继端口配置了之后不会再vlan brief里面在看到f0/4接口在哪个vlan中
Switch(config-if)#exit

复制代码