ToB企服应用市场:ToB评测及商务社交产业平台

标题: 鲲鹏（ARM64）+麒麟（Kylin v10）离线摆设 KubeSphere [打印本页]

---

作者: 篮之新喜    时间: 2024-7-11 00:50
标题: 鲲鹏（ARM64）+麒麟（Kylin v10）离线摆设 KubeSphere
作者：社区用户-天行1st
本文将具体介绍，怎样基于鲲鹏 CPU（ARM64） 和操纵体系 Kylin V10 SP2/SP3，利用 KubeKey 制作 KubeSphere 和 Kubernetes 离线安装包，并实战摆设 KubeSphere 3.3.1 和 Kubernetes 1.22.12 集群。
**实战服务器设置
主机名IPCPUOS用途master-1192.168.10.2Kunpeng-920Kylin V10 SP2离线环境 KubeSphere/k8s-mastermaster-2192.168.10.3Kunpeng-920Kylin V10 SP2离线环境 KubeSphere/k8s-mastermaster-3192.168.10.4Kunpeng-920Kylin V10 SP2离线环境 KubeSphere/k8s-masterdeploy192.168.200.7Kunpeng-920Kylin V10 SP3联网主机用于制作离线包实战环境涉及软件版本信息

• 服务器芯片: Kunpeng-920
  
• 操纵体系：麒麟 V10 SP2 aarch64
  
• Docker: 24.0.7
  
• Harbor: v2.7.1
  
• KubeSphere：v3.3.1
  
• Kubernetes：v1.22.12
  
• KubeKey: v2.3.1
  

1. 本文简介

本文介绍了怎样在 麒麟 V10 aarch64 架构服务器上制品和离线摆设 KubeSphere 和 Kubernetes 集群。我们将使用 KubeSphere 开发的 KubeKey 工具实现自动化摆设，在三台服务器上实现高可用模式最小化摆设 Kubernetes 集群和 KubeSphere。
KubeSphere 和 Kubernetes 在 ARM 架构 和 X86 架构的服务器上摆设，最大的区别在于所有服务使用的容器镜像架构类型的不同，KubeSphere 开源版对于 ARM 架构的默认支持可以实现 KubeSphere-Core 功能，即可以实现最小化的 KubeSphere 和完备的 Kubernetes 集群的摆设。当启用了 KubeSphere 可插拔组件时，会遇到个别组件摆设失败的环境，需要我们手工替换官方或是第三方提供的 ARM 版镜像或是根据官方源码手工构建 ARM 版镜像。如果需要实现开箱即用及更多的技术支持，则需要购买企业版的 KubeSphere。
1.1 确认操纵体系设置

在实行下文的使命之前，先确认操纵体系相关设置。

• 操纵体系类型
  

1. [root@localhost ~]# cat /etc/os-release
2. NAME="Kylin Linux Advanced Server"
3. VERSION="V10 (Halberd)"
4. ID="kylin"
5. VERSION_ID="V10"
6. PRETTY_NAME="Kylin Linux Advanced Server V10 (Halberd)"
7. ANSI_COLOR="0;31

复制代码

• 操纵体系内核
  

1. [root@node1 ~]# uname -r
2. Linux node1 4.19.90-52.22.v2207.ky10.aarch64

复制代码

• 服务器 CPU 信息
  

1. [root@node1 ~]# lscpu
2. Architecture:                    aarch64
3. CPU op-mode(s):                  64-bit
4. Byte Order:                      Little Endian
5. CPU(s):                          32
6. On-line CPU(s) list:             0-31
7. Thread(s) per core:              1
8. Core(s) per socket:              1
9. Socket(s):                       32
10. NUMA node(s):                    2
11. Vendor ID:                       HiSilicon
12. Model:                           0
13. Model name:                      Kunpeng-920
14. Stepping:                        0x1
15. BogoMIPS:                        200.00
16. NUMA node0 CPU(s):               0-15
17. NUMA node1 CPU(s):               16-31
18. Vulnerability Itlb multihit:     Not affected
19. Vulnerability L1tf:              Not affected
20. Vulnerability Mds:               Not affected
21. Vulnerability Meltdown:          Not affected
22. Vulnerability Spec store bypass: Not affected
23. Vulnerability Spectre v1:        Mitigation; __user pointer sanitization
24. Vulnerability Spectre v2:        Not affected
25. Vulnerability Srbds:             Not affected
26. Vulnerability Tsx async abort:   Not affected
27. Flags:                           fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm jscvt fcma dcpop asimddp asimdfhm

复制代码

2. 安装 K8s 依靠服务

本文增长了一台能联网的 deploy 节点，用来制作离线摆设资源包。由于 Harbor 官方不支持 ARM，先使用在线安装 KubeSphere，后续根据 KubeKey 生成的文件作为伪制品。故在 192.168.200.7 服务器以单节点形式摆设 KubeSphere。
2.1 摆设 Docker 和 docker-compose

具体可参考 鲲鹏+欧拉摆设 KubeSphere3.4
安装包-百度云： https://pan.baidu.com/s/1lKtCRqxGMUxyumd4XIz4Bg?pwd=4ct2
解压后实行此中的 install.sh。
2.2 摆设 Harbor 仓库

安装包-百度云： https://pan.baidu.com/s/1fL69nDOG5j92bEk84UQk7g?pwd=uian
解压后实行此中的 install.sh。
2.3 下载麒麟体系 K8s 依靠包

1. mkdir -p /root/kubesphere/k8s-init
2. # 该命令将下载
3. yum -y install openssl socat conntrack ipset ebtables chrony ipvsadm --downloadonly --downloaddir /root/kubesphere/k8s-init
4. # 编写安装脚本
5. vim install.sh
6. #!/bin/bash
7. #
9. rpm -ivh *.rpm --force --nodeps
11. # 打成压缩包，方便离线部署使用
12. tar -czvf k8s-init-Kylin_V10-arm.tar.gz ./k8s-init/*

复制代码

2.4 下载镜像

下载 KubeSphere 3.3.1 所需要的 ARM 镜像。

1. #!/bin/bash
2. #
3. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/ks-console:v3.3.1
4. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/ks-controller-manager:v3.3.1
5. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/ks-installer:v3.3.1
6. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/ks-apiserver:v3.3.1
7. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/openpitrix-jobs:v3.3.1
8. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/alpine:3.14
9. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-apiserver:v1.22.12
10. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-scheduler:v1.22.12
11. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-proxy:v1.22.12
12. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controller-manager:v1.22.12
13. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/provisioner-localpv:3.3.0
14. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/linux-utils:3.3.0
15. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controllers:v3.23.2
16. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/cni:v3.23.2
17. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/pod2daemon-flexvol:v3.23.2
18. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/node:v3.23.2
19. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-state-metrics:v2.5.0
20. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/fluent-bit:v1.8.11
21. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus-config-reloader:v0.55.1
22. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus-operator:v0.55.1
23. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/thanos:v0.25.2
24. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus:v2.34.0
25. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/fluentbit-operator:v0.13.0
26. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/node-exporter:v1.3.1
27. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kubectl:v1.22.0
28. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/notification-manager:v1.4.0
29. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/notification-tenant-sidecar:v3.2.0
30. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/notification-manager-operator:v1.4.0
31. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/alertmanager:v0.23.0
32. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-rbac-proxy:v0.11.0
33. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/docker:19.03
34. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/pause:3.5
35. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/configmap-reload:v0.5.0
36. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/snapshot-controller:v4.0.0
37. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-rbac-proxy:v0.8.0
38. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/coredns:1.8.0
39. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/log-sidecar-injector:1.1
40. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/k8s-dns-node-cache:1.15.12
41. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z
42. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z
43. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/defaultbackend-amd64:1.4
44. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/redis:5.0.14-alpine
45. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/haproxy:2.3
46. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/opensearch:2.6.0
47. docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/busybox:latest
48. docker pull kubesphere/fluent-bit:v2.0.6

复制代码

这里使用 KubeSphere 阿里云镜像，此中有些镜像会下载失败。对于下载失败的镜像，可通过本地电脑，直接去 hub.docker.com 下载。例如：

1. docker pull kubesphere/fluent-bit:v2.0.6 --platform arm64
2. #官方ks-console:v3.3.1(arm版)在麒麟中跑不起来，据运维有术介绍，需要使用node14基础镜像。当在鲲鹏服务器准备自己构建时报错淘宝源https过期，使用https://registry.npmmirror.com仍然报错，于是放弃使用该3.3.0镜像，重命名为3.3.1
3. docker pull zl862520682/ks-console:v3.3.0
4. docker tag zl862520682/ks-console:v3.3.0 dockerhub.kubekey.local/kubesphereio/ks-console:v3.3.1
5. ## mc和minio也需要重新拉取打tag
6. docker pull minio/minio:RELEASE.2020-11-25T22-36-25Z-arm64
7. docker tag  minio/minio:RELEASE.2020-11-25T22-36-25Z-arm64 dockerhub.kubekey.local/kubesphereio/minio:RELEASE

复制代码

2.5 重命名镜像

重新给镜像打 tag，标记为私有仓库镜像

1. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controllers:v3.27.3  dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.27.3
2. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/cni:v3.27.3  dockerhub.kubekey.local/kubesphereio/cni:v3.27.3
3. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/pod2daemon-flexvol:v3.27.3  dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.27.3
4. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/node:v3.27.3  dockerhub.kubekey.local/kubesphereio/node:v3.27.3
5. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/ks-console:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-console:v3.3.1
6. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/alpine:3.14  dockerhub.kubekey.local/kubesphereio/alpine:3.14
7. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/k8s-dns-node-cache:1.22.20  dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.22.20
8. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/ks-controller-manager:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-controller-manager:v3.3.1
9. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/ks-installer:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-installer:v3.3.1
10. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/ks-apiserver:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-apiserver:v3.3.1
11. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/openpitrix-jobs:v3.3.1  dockerhub.kubekey.local/kubesphereio/openpitrix-jobs:v3.3.1
12. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-apiserver:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-apiserver:v1.22.12
13. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-proxy:v1.22.12  dockerhub.kubekey.local/kubesphereio/
14. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controller-manager:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-controller-manager:v1.22.12
15. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-scheduler:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-scheduler:v1.22.12
16. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/provisioner-localpv:3.3.0  dockerhub.kubekey.local/kubesphereio/provisioner-localpv:3.3.0
17. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/linux-utils:3.3.0  dockerhub.kubekey.local/kubesphereio/linux-utils:3.3.0
18. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-state-metrics:v2.5.0  dockerhub.kubekey.local/kubesphereio/kube-state-metrics:v2.5.0
19. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/fluent-bit:v1.8.11  dockerhub.kubekey.local/kubesphereio/fluent-bit:v1.8.11
20. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus-config-reloader:v0.55.1  dockerhub.kubekey.local/kubesphereio/prometheus-config-reloader:v0.55.1
21. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus-operator:v0.55.1  dockerhub.kubekey.local/kubesphereio/prometheus-operator:v0.55.1
22. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/thanos:v0.25.2  dockerhub.kubekey.local/kubesphereio/thanos:v0.25.2
23. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus:v2.34.0  dockerhub.kubekey.local/kubesphereio/prometheus:v2.34.0
24. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/fluentbit-operator:v0.13.0  dockerhub.kubekey.local/kubesphereio/fluentbit-operator:v0.13.0
25. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/node-exporter:v1.3.1  dockerhub.kubekey.local/kubesphereio/node-exporter:v1.3.1
26. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kubectl:v1.22.0  dockerhub.kubekey.local/kubesphereio/kubectl:v1.22.0
27. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/notification-manager:v1.4.0  dockerhub.kubekey.local/kubesphereio/notification-manager:v1.4.0
28. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/notification-tenant-sidecar:v3.2.0  dockerhub.kubekey.local/kubesphereio/notification-tenant-sidecar:v3.2.0
29. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/notification-manager-operator:v1.4.0  dockerhub.kubekey.local/kubesphereio/notification-manager-operator:v1.4.0
30. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/alertmanager:v0.23.0  dockerhub.kubekey.local/kubesphereio/alertmanager:v0.23.0
31. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-rbac-proxy:v0.11.0  dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.11.0
32. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/docker:19.03  dockerhub.kubekey.local/kubesphereio/docker:19.03
33. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/metrics-server:v0.4.2  dockerhub.kubekey.local/kubesphereio/metrics-server:v0.4.2
34. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/pause:3.5  dockerhub.kubekey.local/kubesphereio/pause:3.5
35. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/configmap-reload:v0.5.0  dockerhub.kubekey.local/kubesphereio/configmap-reload:v0.5.0
36. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/snapshot-controller:v4.0.0  dockerhub.kubekey.local/kubesphereio/snapshot-controller:v4.0.0
37. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z  dockerhub.kubekey.local/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z
38. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z  dockerhub.kubekey.local/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z
39. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-rbac-proxy:v0.8.0  dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.8.0
40. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/coredns:1.8.0  dockerhub.kubekey.local/kubesphereio/coredns:1.8.0
41. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/log-sidecar-injector:1.1  dockerhub.kubekey.local/kubesphereio/log-sidecar-injector:1.1
42. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/defaultbackend-amd64:1.4  dockerhub.kubekey.local/kubesphereio/defaultbackend-amd64:1.4
43. docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-proxy:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-proxy:v1.22.12
44. docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/k8s-dns-node-cache:1.22.20 dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.15.12
45. docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controllers:v3.23.2    dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.23.2
46. docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/cni:v3.23.2   dockerhub.kubekey.local/kubesphereio/cni:v3.23.2
47. docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/pod2daemon-flexvol:v3.23.2   dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.23.2
48. docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/node:v3.23.2  dockerhub.kubekey.local/kubesphereio/node:v3.23.2
49. docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/opensearch:2.6.0 dockerhub.kubekey.local/kubesphereio/opensearch:2.6.0
50. docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/busybox:latest dockerhub.kubekey.local/kubesphereio/busybox:latest
51. docker tag kubesphere/fluent-bit:v2.0.6 dockerhub.kubekey.local/kubesphereio/fluent-bit:v2.0.6 # 也可重命名为v1.8.11，可省下后续修改fluent的yaml，这里采用后修改方式

复制代码

2.6 推送镜像至 harbor 仓库

1. #!/bin/bash
2. #
4. docker load < ks3.3.1-images.tar.gz
6. docker login -u admin -p Harbor12345 dockerhub.kubekey.local
8. docker push dockerhub.kubekey.local/kubesphereio/ks-console:v3.3.1
9. docker push dockerhub.kubekey.local/kubesphereio/ks-controller-manager:v3.3.1
10. docker push dockerhub.kubekey.local/kubesphereio/ks-installer:v3.3.1
11. docker push dockerhub.kubekey.local/kubesphereio/ks-apiserver:v3.3.1
12. docker push dockerhub.kubekey.local/kubesphereio/openpitrix-jobs:v3.3.1
13. docker push dockerhub.kubekey.local/kubesphereio/alpine:3.14
14. docker push dockerhub.kubekey.local/kubesphereio/kube-apiserver:v1.22.12
15. docker push dockerhub.kubekey.local/kubesphereio/kube-scheduler:v1.22.12
16. docker push dockerhub.kubekey.local/kubesphereio/kube-proxy:v1.22.12
17. docker push dockerhub.kubekey.local/kubesphereio/kube-controller-manager:v1.22.12
18. docker push dockerhub.kubekey.local/kubesphereio/provisioner-localpv:3.3.0
19. docker push dockerhub.kubekey.local/kubesphereio/linux-utils:3.3.0
20. docker push dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.23.2
21. docker push dockerhub.kubekey.local/kubesphereio/cni:v3.23.2
22. docker push dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.23.2
23. docker push dockerhub.kubekey.local/kubesphereio/node:v3.23.2
24. docker push dockerhub.kubekey.local/kubesphereio/kube-state-metrics:v2.5.0
25. docker push dockerhub.kubekey.local/kubesphereio/fluent-bit:v1.8.11
26. docker push dockerhub.kubekey.local/kubesphereio/prometheus-config-reloader:v0.55.1
27. docker push dockerhub.kubekey.local/kubesphereio/prometheus-operator:v0.55.1
28. docker push dockerhub.kubekey.local/kubesphereio/thanos:v0.25.2
29. docker push dockerhub.kubekey.local/kubesphereio/prometheus:v2.34.0
30. docker push dockerhub.kubekey.local/kubesphereio/fluentbit-operator:v0.13.0
31. docker push dockerhub.kubekey.local/kubesphereio/node-exporter:v1.3.1
32. docker push dockerhub.kubekey.local/kubesphereio/kubectl:v1.22.0
33. docker push dockerhub.kubekey.local/kubesphereio/notification-manager:v1.4.0
34. docker push dockerhub.kubekey.local/kubesphereio/notification-tenant-sidecar:v3.2.0
35. docker push dockerhub.kubekey.local/kubesphereio/notification-manager-operator:v1.4.0
36. docker push dockerhub.kubekey.local/kubesphereio/alertmanager:v0.23.0
37. docker push dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.11.0
38. docker push dockerhub.kubekey.local/kubesphereio/docker:19.03
39. docker push dockerhub.kubekey.local/kubesphereio/pause:3.5
40. docker push dockerhub.kubekey.local/kubesphereio/configmap-reload:v0.5.0
41. docker push dockerhub.kubekey.local/kubesphereio/snapshot-controller:v4.0.0
42. docker push dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.8.0
43. docker push dockerhub.kubekey.local/kubesphereio/coredns:1.8.0
44. docker push dockerhub.kubekey.local/kubesphereio/log-sidecar-injector:1.1
45. docker push dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.15.12
46. docker push dockerhub.kubekey.local/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z
47. docker push dockerhub.kubekey.local/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z
48. docker push dockerhub.kubekey.local/kubesphereio/defaultbackend-amd64:1.4
49. docker push dockerhub.kubekey.local/kubesphereio/redis:5.0.14-alpine
50. docker push dockerhub.kubekey.local/kubesphereio/haproxy:2.3
51. docker push dockerhub.kubekey.local/kubesphereio/opensearch:2.6.0
52. docker push dockerhub.kubekey.local/kubesphereio/busybox:latest
53. docker push dockerhub.kubekey.local/kubesphereio/fluent-bit:v2.0.6

复制代码

3. 使用 KubeKey 摆设 KubeSphere

3.1 移除麒麟体系自带的 podman

podman 是麒麟体系自带的容器引擎，为避免后续与 Docker 冲突，直接卸载。否则后续 CoreDNS/NodelocalDNS 也会受影响无法启动以及各种 Docker 权限问题。

1. yum remove podman

复制代码

3.2 下载 KubeKey

下载 kubekey-v2.3.1-linux-arm64.tar.gz。具体 KubeKey 版本号可以在 KubeKey 发行页面 查看。

• 方式一
  

1. cd ~
2. mkdir kubesphere
3. cd kubesphere/
5. # 选择中文区下载(访问 GitHub 受限时使用)
6. export KKZONE=cn
8. # 执行下载命令，获取最新版的 kk（受限于网络，有时需要执行多次）
9. curl -sfL https://get-kk.kubesphere.io/v2.3.1/kubekey-v2.3.1-linux-arm64.tar.gz | tar xzf -

复制代码

• 方式二
  

使用本地电脑，直接去 GitHub 下载 Releases · kubesphere/kubekey，上传至服务器 /root/kubesphere 目次解压。

1. tar zxf kubekey-v2.3.1-linux-arm64.tar.gz

复制代码

3.3 生成集群创建设置文件

创建集群设置文件，本示例中，选择 KubeSphere 3.3.1 和 Kubernetes 1.22.12。

1. ./kk create config -f kubesphere-v331-v12212.yaml --with-kubernetes v1.22.12 --with-kubesphere v3.3.1

复制代码

命令实行乐成后，在当前目次会生成文件名为 kubesphere-v331-v12212.yaml 的设置文件。
注意： 生成的默认设置文件内容较多，这里就不做过多展示了，更多具体的设置参数请参考 官方设置示例。
本文示例采取 3 个节点同时作为 control-plane、etcd 节点和 worker 节点。
编辑设置文件 kubesphere-v331-v12212.yaml，重要修改 kind: Cluster 和 kind: ClusterConfiguration 两末节的相关设置。
修改 kind: Cluster 末节中 hosts 和 roleGroups 等信息，修改说明如下：

• hosts：指定节点的 IP、ssh 用户、ssh 密码、ssh 端口。特别注意： 一定要手工指定 arch: arm64，否则摆设的时候会安装 X86 架构的软件包。
  
• roleGroups：指定 3 个 etcd、control-plane 节点，复用相同的呆板作为 3 个 worker 节点。
  
• internalLoadbalancer： 启用内置的 HAProxy 负载均衡器。
  
• domain：自定义了一个 opsman.top。
  
• containerManager：使用了 containerd。
  
• storage.openebs.basePath：新增设置，指定默认存储路径为 /data/openebs/local。
  

修改后的示例如下：

1. apiVersion: kubekey.kubesphere.io/v1alpha2
2. kind: Cluster
3. metadata:
4.   name: sample
5. spec:
6.   hosts:
7.   - {name: node1, address: 192.168.200.7, internalAddress: 192.168.200.7, user: root, password: "123456", arch: arm64}
8.   roleGroups:
9.     etcd:
10.     - node1
11.     control-plane:
12.     - node1
13.     worker:
14.     - node1
15.     registry:
16.     - node1
17.   controlPlaneEndpoint:
18.     ## Internal loadbalancer for apiservers
19.     # internalLoadbalancer: haproxy
21.     domain: lb.kubesphere.local
22.     address: ""
23.     port: 6443
24.   kubernetes:
25.     version: v1.22.12
26.     clusterName: cluster.local
27.     autoRenewCerts: true
28.     containerManager: docker
29.   etcd:
30.     type: kubekey
31.   network:
32.     plugin: calico
33.     kubePodsCIDR: 10.233.64.0/18
34.     kubeServiceCIDR: 10.233.0.0/18
35.     ## multus support. https://github.com/k8snetworkplumbingwg/multus-cni
36.     multusCNI:
37.       enabled: false
38.   registry:
39.     type: harbor
40.     auths:
41.       "dockerhub.kubekey.local":
42.         username: admin
43.         password: Harbor12345
44.     privateRegistry: "dockerhub.kubekey.local"
45.     namespaceOverride: "kubesphereio"
46.     registryMirrors: []
47.     insecureRegistries: []
48.   addons: []
52. ---
53. apiVersion: installer.kubesphere.io/v1alpha1
54. kind: ClusterConfiguration
55. metadata:
56.   name: ks-installer
57.   namespace: kubesphere-system
58.   labels:
59.     version: v3.3.1
60. spec:
61.   persistence:
62.     storageClass: ""
63.   authentication:
64.     jwtSecret: ""
65.   zone: ""
66.   local_registry: ""
67.   namespace_override: ""
68.   # dev_tag: ""
69.   etcd:
70.     monitoring: true
71.     endpointIps: localhost
72.     port: 2379
73.     tlsEnable: true
74.   common:
75.     core:
76.       console:
77.         enableMultiLogin: true
78.         port: 30880
79.         type: NodePort
80.     # apiserver:
81.     #  resources: {}
82.     # controllerManager:
83.     #  resources: {}
84.     redis:
85.       enabled: false
86.       volumeSize: 2Gi
87.     openldap:
88.       enabled: false
89.       volumeSize: 2Gi
90.     minio:
91.       volumeSize: 20Gi
92.     monitoring:
93.       # type: external
94.       endpoint: http://prometheus-operated.kubesphere-monitoring-system.svc:9090
95.       GPUMonitoring:
96.         enabled: false
97.     gpu:
98.       kinds:
99.       - resourceName: "nvidia.com/gpu"
100.         resourceType: "GPU"
101.         default: true
102.     es:
103.       # master:
104.       #   volumeSize: 4Gi
105.       #   replicas: 1
106.       #   resources: {}
107.       # data:
108.       #   volumeSize: 20Gi
109.       #   replicas: 1
110.       #   resources: {}
111.       logMaxAge: 7
112.       elkPrefix: logstash
113.       basicAuth:
114.         enabled: false
115.         username: ""
116.         password: ""
117.       externalElasticsearchHost: ""
118.       externalElasticsearchPort: ""
119.   alerting:
120.     enabled: true
121.     # thanosruler:
122.     #   replicas: 1
123.     #   resources: {}
124.   auditing:
125.     enabled: false
126.     # operator:
127.     #   resources: {}
128.     # webhook:
129.     #   resources: {}
130.   devops:
131.     enabled: false
132.     # resources: {}
133.     jenkinsMemoryLim: 8Gi
134.     jenkinsMemoryReq: 4Gi
135.     jenkinsVolumeSize: 8Gi
136.   events:
137.     enabled: false
138.     # operator:
139.     #   resources: {}
140.     # exporter:
141.     #   resources: {}
142.     # ruler:
143.     #   enabled: true
144.     #   replicas: 2
145.     #   resources: {}
146.   logging:
147.     enabled: true
148.     logsidecar:
149.       enabled: true
150.       replicas: 2
151.       # resources: {}
152.   metrics_server:
153.     enabled: false
154.   monitoring:
155.     storageClass: ""
156.     node_exporter:
157.       port: 9100
158.       # resources: {}
159.     # kube_rbac_proxy:
160.     #   resources: {}
161.     # kube_state_metrics:
162.     #   resources: {}
163.     # prometheus:
164.     #   replicas: 1
165.     #   volumeSize: 20Gi
166.     #   resources: {}
167.     #   operator:
168.     #     resources: {}
169.     # alertmanager:
170.     #   replicas: 1
171.     #   resources: {}
172.     # notification_manager:
173.     #   resources: {}
174.     #   operator:
175.     #     resources: {}
176.     #   proxy:
177.     #     resources: {}
178.     gpu:
179.       nvidia_dcgm_exporter:
180.         enabled: false
181.         # resources: {}
182.   multicluster:
183.     clusterRole: none
184.   network:
185.     networkpolicy:
186.       enabled: false
187.     ippool:
188.       type: none
189.     topology:
190.       type: none
191.   openpitrix:
192.     store:
193.       enabled: true
194.   servicemesh:
195.     enabled: false
196.     istio:
197.       components:
198.         ingressGateways:
199.         - name: istio-ingressgateway
200.           enabled: false
201.         cni:
202.           enabled: false
203.   edgeruntime:
204.     enabled: false
205.     kubeedge:
206.       enabled: false
207.       cloudCore:
208.         cloudHub:
209.           advertiseAddress:
210.             - ""
211.         service:
212.           cloudhubNodePort: "30000"
213.           cloudhubQuicNodePort: "30001"
214.           cloudhubHttpsNodePort: "30002"
215.           cloudstreamNodePort: "30003"
216.           tunnelNodePort: "30004"
217.         # resources: {}
218.         # hostNetWork: false
219.       iptables-manager:
220.         enabled: true
221.         mode: "external"
222.         # resources: {}
223.       # edgeService:
224.       #   resources: {}
225.   terminal:
226.     timeout: 600

复制代码

3.4 实行安装

1. ./kk create cluster -f kubesphere-v331-v122123.yaml

复制代码

此节点之所以安装 KubeSphere 是由于 KubeKey 在安装过程中会产生 KubeKey 文件夹并将 K8s 所需要的依靠都下载到 KubeKey 目次。后续我们离线安装重要使用 KubeKey 文件夹，共同一下脚本代替之前的制品。
4. 制作离线安装资源

4.1 导出 K8s 基础依靠包

1. yum -y install openssl socat conntrack ipset ebtables chrony ipvsadm --downloadonly --downloaddir /root/kubesphere/k8s-init
2. # 打成压缩包
3. tar -czvf k8s-init-Kylin_V10-arm.tar.gz ./k8s-init/*

复制代码

4.2 导出 KubeSphere 需要的镜像

导出 KubeSphere 相关的镜像至 ks3.3.1-images.tar。

1. docker save -o ks3.3.1-images.tar  dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.27.3  dockerhub.kubekey.local/kubesphereio/cni:v3.27.3  dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.27.3  dockerhub.kubekey.local/kubesphereio/node:v3.27.3  dockerhub.kubekey.local/kubesphereio/ks-console:v3.3.1  dockerhub.kubekey.local/kubesphereio/alpine:3.14  dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.22.20  dockerhub.kubekey.local/kubesphereio/ks-controller-manager:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-installer:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-apiserver:v3.3.1  dockerhub.kubekey.local/kubesphereio/openpitrix-jobs:v3.3.1  dockerhub.kubekey.local/kubesphereio/kube-apiserver:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-proxy:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-controller-manager:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-scheduler:v1.22.12  dockerhub.kubekey.local/kubesphereio/provisioner-localpv:3.3.0  dockerhub.kubekey.local/kubesphereio/linux-utils:3.3.0  dockerhub.kubekey.local/kubesphereio/kube-state-metrics:v2.5.0  dockerhub.kubekey.local/kubesphereio/fluent-bit:v2.0.6  dockerhub.kubekey.local/kubesphereio/prometheus-config-reloader:v0.55.1  dockerhub.kubekey.local/kubesphereio/prometheus-operator:v0.55.1  dockerhub.kubekey.local/kubesphereio/thanos:v0.25.2  dockerhub.kubekey.local/kubesphereio/prometheus:v2.34.0  dockerhub.kubekey.local/kubesphereio/fluentbit-operator:v0.13.0   dockerhub.kubekey.local/kubesphereio/node-exporter:v1.3.1  dockerhub.kubekey.local/kubesphereio/kubectl:v1.22.0  dockerhub.kubekey.local/kubesphereio/notification-manager:v1.4.0  dockerhub.kubekey.local/kubesphereio/notification-tenant-sidecar:v3.2.0  dockerhub.kubekey.local/kubesphereio/notification-manager-operator:v1.4.0  dockerhub.kubekey.local/kubesphereio/alertmanager:v0.23.0  dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.11.0  dockerhub.kubekey.local/kubesphereio/docker:19.03  dockerhub.kubekey.local/kubesphereio/metrics-server:v0.4.2  dockerhub.kubekey.local/kubesphereio/pause:3.5  dockerhub.kubekey.local/kubesphereio/configmap-reload:v0.5.0  dockerhub.kubekey.local/kubesphereio/snapshot-controller:v4.0.0  dockerhub.kubekey.local/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z  dockerhub.kubekey.local/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z  dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.8.0  dockerhub.kubekey.local/kubesphereio/coredns:1.8.0   dockerhub.kubekey.local/kubesphereio/defaultbackend-amd64:1.4 dockerhub.kubekey.local/kubesphereio/redis:5.0.14-alpine dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.15.12 dockerhub.kubekey.local/kubesphereio/node:v3.23.2 dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.23.2 dockerhub.kubekey.local/kubesphereio/cni:v3.23.2 dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.23.2 dockerhub.kubekey.local/kubesphereio/haproxy:2.3 dockerhub.kubekey.local/kubesphereio/busybox:latest dockerhub.kubekey.local/kubesphereio/opensearch:2.6.0 dockerhub.kubekey.local/kubesphereio/fluent-bit:v2.0.6

复制代码

压缩。

1. gzip ks3.3.1-images.tar

复制代码

4.3 导出 KubeSphere 文件夹

1. [root@node1 ~]# cd /root/kubesphere
2. [root@node1 kubesphere]# ls
3. create_project_harbor.sh  docker-24.0.7-arm.tar.gz  fluent-bit-daemonset.yaml  harbor-arm.tar.gz  harbor.tar.gz  install.sh  k8s-init-Kylin_V10-arm.tar.gz  ks3.3.1-images.tar.gz  ks3.3.1-offline  push-images.sh
5. tar -czvf kubeshpere.tar.gz ./kubesphere/*

复制代码

install.sh 内容。

1. #!/usr/bin/env bash
2. read -p "请先修改机器配置文件ks3.3.1-offline/kubesphere-v331-v12212.yaml中相关IP地址，是否已修改(yes/no)" B
3. do_k8s_init(){
4.         echo "--------开始进行依赖包初始化------"
5.         tar zxf k8s-init-Kylin_V10-arm.tar.gz
6.         cd k8s-init && ./install.sh
7.         cd -
8.         rm -rf k8s-init
9. }
11. install_docker(){
12.         echo "--------开始安装docker--------"
13.         tar zxf docker-24.0.7-arm.tar.gz
14.         cd docker && ./install.sh
15.         cd -
17. }
18. install_harbor(){
19.         echo "-------开始安装harbor----------"
20.         tar zxf  harbor-arm.tar.gz
21.         cd harbor && ./install.sh
22.         cd -
23.         echo "--------开始推送镜像----------"
24.         source create_project_harbor.sh
25.         source push-images.sh
26.         echo "--------镜像推送完成--------"
27. }
28. install_ks(){
29.         echo "--------开始安装kubesphere--------"
30. #        tar zxf ks3.3.1-offline.tar.gz
31.         cd ks3.3.1-offline && ./install.sh
32. }
34. if [ "$B" = "yes" ] || [ "$B" = "y" ]; then
35.     do_k8s_init
36.     install_docker
37.     install_harbor
38.     install_ks
39. else
40.     echo "请先配置集群配置文件"
41.     exit 1
42. fi

复制代码

5. 离线环境安装 KubeSphere

5.1 卸载 podman

1. yum remove podman -y

复制代码

5.2 安装 K8s 依靠包

所有节点都需要操纵，上传 k8s-init-Kylin_V10-arm.tar.gz 并解压后实行 install.sh。
5.3 安装 KubeSphere 集群

上传 kubeshpere.tar.gz 并解压，修改 ./kubesphere/ks3.3.1-offline/kubesphere-v331-v12212.yaml 集群设置文件中相关 ip，密码等信息。

1. **************************************************
2. Waiting for all tasks to be completed ...
3. task alerting status is successful  (1/6)
4. task network status is successful  (2/6)
5. task multicluster status is successful  (3/6)
6. task openpitrix status is successful  (4/6)
7. task logging status is successful  (5/6)
8. task monitoring status is successful  (6/6)
9. **************************************************
10. Collecting installation results ...
11. #####################################################
12. ###              Welcome to KubeSphere!           ###
13. #####################################################
15. Console: http://192.168.10.2:30880
16. Account: admin
17. Password: P@88w0rd
18. NOTES：
19.   1. After you log into the console, please check the
20.      monitoring status of service components in
21.      "Cluster Management". If any service is not
22.      ready, please wait patiently until all components
23.      are up and running.
24.   2. Please change the default password after login.
26. #####################################################
27. https://kubesphere.io             2024-07-03 11:10:11
28. #####################################################

复制代码

5.4 修改 fluent-bit

1. kubectl edit daemonsets fluent-bit -n kubesphere-logging-system
2. 修改其中fluent-bit版本1.8.11为2.0.6

复制代码

5.5 关闭/删除 es 相关服务和负载

如果不需要日志功能，可以修改 KubeSphere 创建集群设置文件不安装 log 插件，此时 5.4、5.5 以及镜像可以更加简化。
6. 测试查看

1. [root@node1 ~]# kubectl get nodes
2. NAME    STATUS   ROLES                         AGE   VERSION
3. node1   Ready    control-plane,master,worker   26h   v1.22.12
4. node2   Ready    control-plane,master,worker   26h   v1.22.12
5. node3   Ready    control-plane,master,worker   26h   v1.22.12

复制代码

7. 总结

本文重要实战演示了 ARM 版 麒麟 V10 服务器通过在线环境摆设 K8s 和 KubeSphere，并将基础依靠，需要的 Docker 镜像和 Harbor，以及 KubeKey 摆设 KubeSphere 下载的各类包一起打包。通过 shell 脚本编写简单的摆设过程，实现离线环境安装 K8s 和 KubeSphere。
离线安装重要知识点：

• 卸载 podman
  
• 安装 K8s 依靠包
  
• 安装 Docker
  
• 安装 Harbor
  
• 将 K8s 和 KubeSphere 需要的镜像推送到 Harbor
  
• 使用 KubeKey 摆设集群
  

本文由博客一文多发平台 OpenWrite 发布！

免责声明：如果侵犯了您的权益，请联系站长，我们会及时删除侵权内容，谢谢合作！更多信息从访问主页：qidao123.com:ToB企服之家，中国第一个企服评测及商务社交产业平台。

---

欢迎光临 ToB企服应用市场:ToB评测及商务社交产业平台 (https://dis.qidao123.com/)

Powered by Discuz! X3.4