ToB企服应用市场:ToB评测及商务社交产业平台

标题: CV05_深度学习模块之间的缝合教学(1) [打印本页]

作者: 张裕 时间: 2024-7-15 20:10
标题: CV05_深度学习模块之间的缝合教学(1)
1.1 在哪里缝

测试文件？（×）
练习文件？（×）
模型文件？（√）
1.2 骨干网络与模块缝合

以Vision Transformer为例，模型文件里有很多类，我们只在末了集大成的那个类里添加模块。

之后后，我们准备好我们要缝合的模块，比如SE Net模块，我们先创建一个测试文件测试可否跑通

import numpy as np
import torch
from torch import nn
from torch.nn import init
class SEAttention(nn.Module):
# 初始化SE模块，channel为通道数，reduction为降维比率
def __init__(self, channel=512, reduction=16):
super().__init__()
self.avg_pool = nn.AdaptiveAvgPool2d(1) # 自适应平均池化层，将特征图的空间维度压缩为1x1
self.fc = nn.Sequential( # 定义两个全连接层作为激励操作，通过降维和升维调整通道重要性
nn.Linear(channel, channel // reduction, bias=False), # 降维，减少参数数量和计算量
nn.ReLU(inplace=True), # ReLU激活函数，引入非线性
nn.Linear(channel // reduction, channel, bias=False), # 升维，恢复到原始通道数
nn.Sigmoid() # Sigmoid激活函数，输出每个通道的重要性系数
)
# 权重初始化方法
def init_weights(self):
for m in self.modules(): # 遍历模块中的所有子模块
if isinstance(m, nn.Conv2d): # 对于卷积层
init.kaiming_normal_(m.weight, mode='fan_out') # 使用Kaiming初始化方法初始化权重
if m.bias is not None:
init.constant_(m.bias, 0) # 如果有偏置项，则初始化为0
elif isinstance(m, nn.BatchNorm2d): # 对于批归一化层
init.constant_(m.weight, 1) # 权重初始化为1
init.constant_(m.bias, 0) # 偏置初始化为0
elif isinstance(m, nn.Linear): # 对于全连接层
init.normal_(m.weight, std=0.001) # 权重使用正态分布初始化
if m.bias is not None:
init.constant_(m.bias, 0) # 偏置初始化为0
# 前向传播方法
def forward(self, x):
b, c, _, _ = x.size() # 获取输入x的批量大小b和通道数c
y = self.avg_pool(x).view(b, c) # 通过自适应平均池化层后，调整形状以匹配全连接层的输入
y = self.fc(y).view(b, c, 1, 1) # 通过全连接层计算通道重要性，调整形状以匹配原始特征图的形状
return x * y.expand_as(x) # 将通道重要性系数应用到原始特征图上，进行特征重新校准
# 示例使用
if __name__ == '__main__':
input = torch.randn(50, 512, 7, 7) # 随机生成一个输入特征图
se = SEAttention(channel=512, reduction=8) # 实例化SE模块，设置降维比率为8
output = se(input) # 将输入特征图通过SE模块进行处理
print(output.shape) # 打印处理后的特征图形状，验证SE模块的作用

复制代码

打印处置处罚后的形状，我们这里要留意，缝合模块时只必要留意第一维，也就是这个channel，要和骨干网络保持一致，只要你把输入输出的通道数对齐，那么这个通道数就可以缝合乐成。
把模块复制进骨干网络中：

然后举行缝合，在缝合之前要先测试通道是否匹配，否则肯定报错。
怎样验证通道数

我们找到骨干网络前向传播的部门，在你想加入这个模块地方print(x.shape)即可。运行练习文件：
放在最前面：

通道数为3（8为batch size）。
将模块添加进骨干网络

在骨干网络的init函数下添加：（ctrl+p可查看参数）通道数与之前查的对齐。

在前向传播中添加：

看看是否正常运行：

正常运行，阐明模块缝合乐成！
打印缝合后的模型结构

该操作在模型文件中举行。

VisionTransformer(
(patch_embed): PatchEmbed(
(proj): Conv2d(3, 768, kernel_size=(16, 16), stride=(16, 16))
(norm): Identity()
)
(pos_drop): Dropout(p=0.0, inplace=False)
(blocks): Sequential(
(0): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(1): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(2): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(3): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(4): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(5): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(6): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(7): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(8): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(9): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(10): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
(11): Block(
(norm1): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(attn): Attention(
(qkv): Linear(in_features=768, out_features=2304, bias=True)
(attn_drop): Dropout(p=0.0, inplace=False)
(proj): Linear(in_features=768, out_features=768, bias=True)
(proj_drop): Dropout(p=0.0, inplace=False)
)
(drop_path): Identity()
(norm2): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(mlp): Mlp(
(fc1): Linear(in_features=768, out_features=3072, bias=True)
(act): GELU()
(fc2): Linear(in_features=3072, out_features=768, bias=True)
(drop): Dropout(p=0.0, inplace=False)
)
)
)
(norm): LayerNorm((768,), eps=1e-06, elementwise_affine=True)
(pre_logits): Sequential(
(fc): Linear(in_features=768, out_features=768, bias=True)
(act): Tanh()
)
(head): Linear(in_features=768, out_features=21843, bias=True)
(se): SEAttention(
(avg_pool): AdaptiveAvgPool2d(output_size=1)
(fc): Sequential(
(0): Linear(in_features=3, out_features=0, bias=False)
(1): ReLU(inplace=True)
(2): Linear(in_features=0, out_features=3, bias=False)
(3): Sigmoid()
)
)
)
我们可以看到多了一个SEAttention,阐明模块缝合进去了！

1.3 模块之间缝合

以SENet和ECA模块为例。

串联模块

方式1

同1.2。照猫画虎。（留意通道数保持一致）

打印模型结构：
ECAAttention(
(gap): AdaptiveAvgPool2d(output_size=1)
(conv): Conv1d(1, 1, kernel_size=(3,), stride=(1,), padding=(1,))
(sigmoid): Sigmoid()
(se): SEAttention(
(avg_pool): AdaptiveAvgPool2d(output_size=1)
(fc): Sequential(
(0): Linear(in_features=64, out_features=4, bias=False)
(1): ReLU(inplace=True)
(2): Linear(in_features=4, out_features=64, bias=False)
(3): Sigmoid()
)))
方式2

我们界说一个串联函数，将模块之间串联起来：

实例化查看一下模型结构

输出结果：
torch.Size([1, 63, 64, 64]) torch.Size([1, 63, 64, 64])
Cascade(
(se): SEAttention(
(avg_pool): AdaptiveAvgPool2d(output_size=1)
(fc): Sequential(
(0): Linear(in_features=63, out_features=3, bias=False)
(1): ReLU(inplace=True)
(2): Linear(in_features=3, out_features=63, bias=False)
(3): Sigmoid()
)
)
(eca): ECAAttention(
(gap): AdaptiveAvgPool2d(output_size=1)
(conv): Conv1d(1, 1, kernel_size=(63,), stride=(1,), padding=(31,))
(sigmoid): Sigmoid()
)
)
并联模块

对于并联模块，方法有很多种，两个两个模块输出的张量可以：
（1）逐元素相加（2）逐元素相乘（3）concat拼接（4）等等

输出结果：
torch.Size([1, 63, 64, 64]) torch.Size([1, 126, 64, 64])
Cascade(
(se): SEAttention(
(avg_pool): AdaptiveAvgPool2d(output_size=1)
(fc): Sequential(
(0): Linear(in_features=63, out_features=3, bias=False)
(1): ReLU(inplace=True)
(2): Linear(in_features=3, out_features=63, bias=False)
(3): Sigmoid()
)
)
(eca): ECAAttention(
(gap): AdaptiveAvgPool2d(output_size=1)
(conv): Conv1d(1, 1, kernel_size=(63,), stride=(1,), padding=(31,))
(sigmoid): Sigmoid()
)
)
1.4 思考

我们不要拘泥于只串联获并联，可以将二者联合，多个模块中，部门模块并联后又与其他模块串联，等等。。这种排列组合之后，总会有一个你想要的模型！！！

免责声明：如果侵犯了您的权益，请联系站长，我们会及时删除侵权内容，谢谢合作！更多信息从访问主页：qidao123.com:ToB企服之家，中国第一个企服评测及商务社交产业平台。

欢迎光临 ToB企服应用市场:ToB评测及商务社交产业平台 (https://dis.qidao123.com/)

Powered by Discuz! X3.4