银河麒麟高级服务器操作体系（通用）安装和编译指定的python3版本 - ToB企服应用市场:ToB评测及商务社交产业平台

[root@localhost ~]# nkvers
############## Kylin Linux Version #################
Release:
Kylin Linux Advanced Server release V10 (Lance)
Kernel:
4.19.90-52.22.v2207.ky10.x86_64
Build:
Kylin Linux Advanced Server
release V10 (SP3) /(Lance)-x86_64-Build23/20230324
#################################################

复制代码

如果网络可以正常连接互联网，直接执行，如果不能访问外网，需要将ISO镜像文件配置成本地yum源！！
[root@localhost ~]# yum install libffi-devel tcl-devel tk-devel perl-CPAN openssl-devel readline-devel sqlite-devel openssl -y

复制代码

[root@localhost ~]# wget https://www.python.org/ftp/python/3.12.4/Python-3.12.4.tar.xz
--2024-07-04 09:15:09-- https://www.python.org/ftp/python/3.12.4/Python-3.12.4.tar.xz
正在解析主机 www.python.org (www.python.org)... 146.75.112.223, 2a04:4e42:8c::223
正在连接 www.python.org (www.python.org)|146.75.112.223|:443... 已连接。
已发出 HTTP 请求，正在等待回应... 200 OK
长度：20659356 (20M) [application/octet-stream]
正在保存至: “Python-3.12.4.tar.xz”
Python-3.12.4.tar.xz 100%[=====================================================================================================>] 19.70M 1.48MB/s 用时 43s
2024-07-04 09:15:53 (467 KB/s) - 已保存 “Python-3.12.4.tar.xz” [20659356/20659356])

复制代码

[root@localhost ~]# ls
anaconda-ks.cfg initial-setup-ks.cfg Python-3.12.4.tar.xz test.py
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# tar xf Python-3.12.4.tar.xz
[root@localhost ~]#
[root@localhost ~]# cd Python-3.12.4
[root@localhost Python-3.12.4]# ls
aclocal.m4 config.sub configure.ac Grammar install-sh LICENSE Makefile.pre.in Modules Parser PCbuild pyconfig.h.in README.rst
config.guess configure Doc Include Lib Mac Misc Objects PC Programs Python Tools
[root@localhost Python-3.12.4]#

复制代码

[root@localhost Python-3.12.4]#./configure --prefix=/opt/python3 --enable-optimizations
......
checking for chown... yes
checking for clock... yes
checking for close_range... no
checking for confstr... yes
checking for copy_file_range... yes
checking for ctermid... yes
checking for dup... yes
checking for dup3... yes
checking for execv... yes
checking for explicit_bzero... yes
checking for explicit_memset... no
checking for faccessat... yes
checking for fchmod... yes
checking for fchmodat... yes
checking for fchown... yes
checking for fchownat... yes
checking for fdopendir... yes
checking for fdwalk... no
checking for fexecve... yes
checking for fork... yes
checking for fork1... no
checking for fpathconf... yes
checking for fstatat... yes
checking for ftime... yes
checking for ftruncate... yes
checking for futimens... yes
checking for futimes... yes
checking for futimesat... yes
checking for gai_strerror... yes
checking for getegid... yes
checking for getentropy... yes
checking for geteuid... yes
checking for getgid... yes
checking for getgrgid... yes
checking for getgrgid_r... yes
checking for getgrnam_r... yes
checking for getgrouplist... yes
checking for getgroups... yes
checking for gethostname... yes
checking for getitimer... yes
checking for getloadavg... yes
checking for getlogin... yes
checking for getpeername... yes
checking for getpgid... yes
checking for getpid... yes
checking for getppid... yes
checking for getpriority... yes
checking for _getpty... no
checking for getpwent... yes
checking for getpwnam_r... yes
checking for getpwuid... yes
checking for getpwuid_r... yes
checking for getresgid... yes
checking for getresuid... yes
checking for getrusage... yes
checking for getsid... yes
checking for getspent... yes
checking for getspnam... yes
checking for getuid... yes
checking for getwd... yes
checking for if_nameindex... yes
checking for initgroups... yes
checking for kill... yes
checking for killpg... yes
checking for lchown... yes
checking for linkat... yes
checking for lockf... yes
checking for lstat... yes
checking for lutimes... yes
checking for madvise... yes
checking for mbrtowc... yes
checking for memrchr... yes
checking for mkdirat... yes
checking for mkfifo... yes
checking for mkfifoat... yes
checking for mknod... yes
checking for mknodat... yes
checking for mktime... yes
checking for mmap... yes
checking for mremap... yes
checking for nice... yes
checking for openat... yes
checking for opendir... yes
checking for pathconf... yes
checking for pause... yes
checking for pipe... yes
checking for pipe2... yes
checking for plock... no
checking for poll... yes
checking for posix_fadvise... yes
checking for posix_fallocate... yes
checking for posix_spawn... yes
checking for posix_spawnp... yes
checking for pread... yes
checking for preadv... yes
checking for preadv2... yes
checking for pthread_condattr_setclock... yes
checking for pthread_init... no
checking for pthread_kill... yes
checking for pwrite... yes
checking for pwritev... yes
checking for pwritev2... yes
checking for readlink... yes
checking for readlinkat... yes
checking for readv... yes
checking for realpath... yes
checking for renameat... yes
checking for rtpSpawn... no
checking for sched_get_priority_max... yes
checking for sched_rr_get_interval... yes
checking for sched_setaffinity... yes
checking for sched_setparam... yes
checking for sched_setscheduler... yes
checking for sem_clockwait... no
checking for sem_getvalue... yes
checking for sem_open... yes
checking for sem_timedwait... yes
checking for sem_unlink... yes
checking for sendfile... yes
checking for setegid... yes
checking for seteuid... yes
checking for setgid... yes
checking for sethostname... yes
checking for setitimer... yes
checking for setlocale... yes
checking for setpgid... yes
checking for setpgrp... yes
checking for setpriority... yes
checking for setregid... yes
checking for setresgid... yes
checking for setresuid... yes
checking for setreuid... yes
checking for setsid... yes
checking for setuid... yes
checking for setvbuf... yes
checking for shutdown... yes
checking for sigaction... yes
checking for sigaltstack... yes
checking for sigfillset... yes
checking for siginterrupt... yes
checking for sigpending... yes
checking for sigrelse... yes
checking for sigtimedwait... yes
checking for sigwait... yes
checking for sigwaitinfo... yes
checking for snprintf... yes
checking for splice... yes
checking for strftime... yes
checking for strlcpy... no
checking for strsignal... yes
checking for symlinkat... yes
checking for sync... yes
checking for sysconf... yes
checking for system... yes
checking for tcgetpgrp... yes
checking for tcsetpgrp... yes
checking for tempnam... yes
checking for timegm... yes
checking for times... yes
checking for tmpfile... yes
checking for tmpnam... yes
checking for tmpnam_r... yes
checking for truncate... yes
checking for ttyname... yes
checking for umask... yes
checking for uname... yes
checking for unlinkat... yes
checking for utimensat... yes
checking for utimes... yes
checking for vfork... yes
checking for wait... yes
checking for wait3... yes
checking for wait4... yes
checking for waitid... yes
checking for waitpid... yes
checking for wcscoll... yes
checking for wcsftime... yes
checking for wcsxfrm... yes
checking for wmemcmp... yes
checking for writev... yes
checking for gcc -pthread options needed to detect all undeclared functions... none needed
checking whether dirfd is declared... yes
checking for chroot... yes
checking for link... yes
checking for symlink... yes
checking for fchdir... yes
checking for fsync... yes
checking for fdatasync... yes
checking for epoll_create... yes
checking for epoll_create1... yes
checking for kqueue... no
checking for prlimit... yes
checking for _dyld_shared_cache_contains_path... no
checking for memfd_create... yes
checking for eventfd... yes
checking for ctermid_r... no
checking for flock declaration... yes
checking for flock... yes
checking for getpagesize... yes
checking for broken unsetenv... no
checking for true... true
checking for inet_aton in -lc... yes
checking for chflags... no
checking for lchflags... no
checking for zlib >= 1.2.0... yes
checking for bzip2... yes
checking for liblzma... yes
checking for hstrerror... yes
checking for getservbyname... yes
checking for getservbyport... yes
checking for gethostbyname... yes
checking for gethostbyaddr... yes
checking for getprotobyname... yes
checking for inet_aton... yes
checking for inet_ntoa... yes
checking for inet_pton... yes
checking for getpeername... (cached) yes
checking for getsockname... yes
checking for accept... yes
checking for bind... yes
checking for connect... yes
checking for listen... yes
checking for recvfrom... yes
checking for sendto... yes
checking for setsockopt... yes
checking for socket... yes
checking for setgroups... yes
checking for openpty... no
checking for openpty in -lutil... yes
checking for library containing login_tty... none required
checking for forkpty... yes
checking for fseek64... no
checking for fseeko... yes
checking for fstatvfs... yes
checking for ftell64... no
checking for ftello... yes
checking for statvfs... yes
checking for dup2... yes
checking for getpgrp... yes
checking for setpgrp... (cached) yes
checking for setns... yes
checking for unshare... yes
checking for libxcrypt >= 3.1.1... yes
checking for crypt or crypt_r... yes
checking for clock_gettime... yes
checking for clock_getres... yes
checking for clock_settime... yes
checking for clock_nanosleep... yes
checking for nanosleep... yes
checking for major, minor, and makedev... yes
checking for getaddrinfo... yes
checking getaddrinfo bug... no
checking for getnameinfo... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for struct tm.tm_zone... yes
checking for struct stat.st_rdev... yes
checking for struct stat.st_blksize... yes
checking for struct stat.st_flags... no
checking for struct stat.st_gen... no
checking for struct stat.st_birthtime... no
checking for struct stat.st_blocks... yes
checking for struct passwd.pw_gecos... yes
checking for struct passwd.pw_passwd... yes
checking for siginfo_t.si_band... yes
checking for time.h that defines altzone... no
checking for addrinfo... yes
checking for sockaddr_storage... yes
checking for sockaddr_alg... yes
checking for an ANSI C-conforming const... yes
checking for working signed char... yes
checking for prototypes... yes
checking for socketpair... yes
checking if sockaddr has sa_len member... no
checking for gethostbyname_r... yes
checking gethostbyname_r with 6 args... yes
checking for __fpu_control... yes
checking for --with-libm=STRING... default LIBM="-lm"
checking for --with-libc=STRING... default LIBC=""
checking for x64 gcc inline assembler... yes
checking whether float word ordering is bigendian... no
checking whether we can use gcc inline assembler to get and set x87 control word... yes
checking whether we can use gcc inline assembler to get and set mc68881 fpcr... no
checking for x87-style double rounding... no
checking for acosh... yes
checking for asinh... yes
checking for atanh... yes
checking for erf... yes
checking for erfc... yes
checking for expm1... yes
checking for log1p... yes
checking for log2... yes
checking whether POSIX semaphores are enabled... yes
checking for broken sem_getvalue... no
checking whether RTLD_LAZY is declared... yes
checking whether RTLD_NOW is declared... yes
checking whether RTLD_GLOBAL is declared... yes
checking whether RTLD_LOCAL is declared... yes
checking whether RTLD_NODELETE is declared... yes
checking whether RTLD_NOLOAD is declared... yes
checking whether RTLD_DEEPBIND is declared... yes
checking whether RTLD_MEMBER is declared... no
checking digit size for Python's longs... no value specified
checking for wchar.h... (cached) yes
checking size of wchar_t... 4
checking whether wchar_t is signed... yes
checking whether wchar_t is usable... no
checking whether byte ordering is bigendian... no
checking ABIFLAGS...
checking SOABI... cpython-312-x86_64-linux-gnu
checking LDVERSION... $(VERSION)$(ABIFLAGS)
checking for --with-platlibdir... no
checking for --with-wheel-pkg-dir... no
checking whether right shift extends the sign bit... yes
checking for getc_unlocked() and friends... yes
checking for readline... yes
checking how to link readline... readline (CFLAGS: -I/usr/include/readline -D_DEFAULT_SOURCE , LIBS: -lreadline )
checking whether rl_completion_append_character is declared... yes
checking whether rl_completion_suppress_append is declared... yes
checking for rl_pre_input_hook in -lreadline... yes
checking for rl_completion_display_matches_hook in -lreadline... yes
checking for rl_resize_terminal in -lreadline... yes
checking for rl_completion_matches in -lreadline... yes
checking whether rl_catch_signals is declared... yes
checking for append_history in -lreadline... yes
checking for rl_compdisp_func_t... yes
checking for broken nice()... no
checking for broken poll()... no
checking for working tzset()... yes
checking for tv_nsec in struct stat... yes
checking for tv_nsec2 in struct stat... no
checking for curses.h... yes
checking for ncurses.h... yes
checking for ncursesw... yes
checking curses module flags... ncursesw (CFLAGS: -D_DEFAULT_SOURCE , LIBS: -lncursesw -ltinfo )
checking for panel.h... yes
checking for panelw... yes
checking panel flags... panelw (CFLAGS: -D_DEFAULT_SOURCE , LIBS: -lpanelw )
checking for term.h... yes
checking whether mvwdelch is an expression... yes
checking whether WINDOW has _flags... yes
checking for curses function is_pad... yes
checking for curses function is_term_resized... yes
checking for curses function resize_term... yes
checking for curses function resizeterm... yes
checking for curses function immedok... yes
checking for curses function syncok... yes
checking for curses function wchgat... yes
checking for curses function filter... yes
checking for curses function has_key... yes
checking for curses function typeahead... yes
checking for curses function use_env... yes
configure: checking for device files
checking for /dev/ptmx... yes
checking for /dev/ptc... no
checking for socklen_t... yes
checking for broken mbstowcs... no
checking for --with-computed-gotos... no value specified
checking whether gcc -pthread supports computed gotos... yes
checking for build directories... done
checking for -O2... yes
checking for glibc _FORTIFY_SOURCE/memmove bug... no
checking for gcc ipa-pure-const bug... no
checking for stdatomic.h... yes
checking for builtin __atomic_load_n and __atomic_store_n functions... yes
checking for ensurepip... upgrade
checking if the dirent structure of a d_type field... yes
checking for the Linux getrandom() syscall... yes
checking for the getrandom() function... yes
checking for library containing shm_open... -lrt
checking for shm_open... yes
checking for shm_unlink... yes
checking for pkg-config... /bin/pkg-config
checking whether compiling and linking against OpenSSL works... yes
checking for --with-openssl-rpath...
checking whether OpenSSL provides required ssl module APIs... yes
checking whether OpenSSL provides required hashlib module APIs... yes
checking for --with-ssl-default-suites... python
checking for --with-builtin-hashlib-hashes... md5,sha1,sha2,sha3,blake2
checking for libb2... no
checking for --disable-test-modules... yes
checking for stdlib extension module _multiprocessing... yes
checking for stdlib extension module _posixshmem... yes
checking for stdlib extension module fcntl... yes
checking for stdlib extension module mmap... yes
checking for stdlib extension module _socket... yes
checking for stdlib extension module grp... yes
checking for stdlib extension module ossaudiodev... yes
checking for stdlib extension module pwd... yes
checking for stdlib extension module resource... yes
checking for stdlib extension module _scproxy... n/a
checking for stdlib extension module spwd... yes
checking for stdlib extension module syslog... yes
checking for stdlib extension module termios... yes
checking for stdlib extension module pyexpat... yes
checking for stdlib extension module _elementtree... yes
checking for stdlib extension module _md5... yes
checking for stdlib extension module _sha1... yes
checking for stdlib extension module _sha2... yes
checking for stdlib extension module _sha3... yes
checking for stdlib extension module _blake2... yes
checking for stdlib extension module _crypt... yes
checking for stdlib extension module _ctypes... yes
checking for stdlib extension module _curses... yes
checking for stdlib extension module _curses_panel... yes
checking for stdlib extension module _decimal... yes
checking for stdlib extension module _dbm... missing
checking for stdlib extension module _gdbm... missing
checking for stdlib extension module nis... missing
checking for stdlib extension module readline... yes
checking for stdlib extension module _sqlite3... yes
checking for stdlib extension module _tkinter... yes
checking for stdlib extension module _uuid... missing
checking for stdlib extension module zlib... yes
checking for stdlib extension module _bz2... yes
checking for stdlib extension module _lzma... yes
checking for stdlib extension module _ssl... yes
checking for stdlib extension module _hashlib... yes
checking for stdlib extension module _testcapi... yes
checking for stdlib extension module _testclinic... yes
checking for stdlib extension module _testinternalcapi... yes
checking for stdlib extension module _testbuffer... yes
checking for stdlib extension module _testimportmultiple... yes
checking for stdlib extension module _testmultiphase... yes
checking for stdlib extension module xxsubtype... yes
checking for stdlib extension module _xxtestfuzz... yes
checking for stdlib extension module _ctypes_test... yes
checking for stdlib extension module xxlimited... yes
checking for stdlib extension module xxlimited_35... yes
configure: creating ./config.status
config.status: creating Makefile.pre
config.status: creating Misc/python.pc
config.status: creating Misc/python-embed.pc
config.status: creating Misc/python-config.sh
config.status: creating Modules/Setup.bootstrap
config.status: creating Modules/Setup.stdlib
config.status: creating Modules/ld_so_aix
config.status: creating pyconfig.h
configure: creating Modules/Setup.local
configure: creating Makefile
[root@localhost Python-3.12.4]#

复制代码

[root@localhost Python-3.12.4]# make && make install
if test "no-framework" = "no-framework" ; then \
/bin/install -c python /opt/python3/bin/python3.12; \
else \
/bin/install -c -s Mac/pythonw /opt/python3/bin/python3.12; \
fi
if test "3.12" != "3.12"; then \
if test -f /opt/python3/bin/python3.12 -o -h /opt/python3/bin/python3.12; \
then rm -f /opt/python3/bin/python3.12; \
fi; \
(cd /opt/python3/bin; ln python3.12 python3.12); \
fi
if test "x" != "x" ; then \
rm -f /opt/python3/bin/python3.12-32; \
lipo \
-output /opt/python3/bin/python3.12-32 \
/opt/python3/bin/python3.12; \
fi
if test "x" != "x" ; then \
rm -f /opt/python3/bin/python3.12-intel64; \
lipo \
-output /opt/python3/bin/python3.12-intel64 \
/opt/python3/bin/python3.12; \
fi
# Install macOS debug information (if available)
if test -d "python.dSYM"; then \
echo /opt/python3/bin/python3.12; \
/opt/python3/bin/python3.12; \
fi
if test "no-framework" = "no-framework" ; then \
if test -d "libpython3.12.a.dSYM"; then \
echo /opt/python3/lib/libpython3.12.a; \
/opt/python3/lib/libpython3.12.a; \
fi \
else \
if test -d "libpython3.12.a.dSYM"; then \
echo /libpython3.12.a; \
/libpython3.12.a; \
fi \
fi
Rebuilding with profile guided optimizations:
rm -f profile-clean-stamp
make build_all CFLAGS_NODIST=" -fprofile-use -fprofile-correction" LDFLAGS_NODIST=""
make[1]: 进入目录“/root/Python-3.12.4”
The necessary bits to build these optional modules were not found:
_dbm _gdbm _uuid
nis
To find the necessary bits, look in configure.ac and config.log.
......
......
......
......
......
......
/bin/install -c -m 755 Modules/_bisect.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_bisect.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_contextvars.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_contextvars.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_csv.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_csv.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_heapq.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_heapq.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_json.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_json.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_lsprof.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_lsprof.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_opcode.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_opcode.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_pickle.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_pickle.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_queue.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_queue.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_random.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_random.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_struct.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_struct.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_xxsubinterpreters.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_xxsubinterpreters.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_xxinterpchannels.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_xxinterpchannels.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_zoneinfo.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_zoneinfo.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/audioop.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/audioop.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/math.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/math.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/cmath.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/cmath.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_statistics.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_statistics.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_datetime.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_datetime.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_decimal.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_decimal.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/binascii.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/binascii.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_bz2.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_bz2.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_lzma.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_lzma.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/zlib.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/zlib.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/readline.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/readline.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_md5.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_md5.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_sha1.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_sha1.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_sha2.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_sha2.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_sha3.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_sha3.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_blake2.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_blake2.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/pyexpat.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/pyexpat.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_elementtree.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_elementtree.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_codecs_cn.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_codecs_cn.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_codecs_hk.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_codecs_hk.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_codecs_iso2022.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_codecs_iso2022.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_codecs_jp.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_codecs_jp.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_codecs_kr.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_codecs_kr.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_codecs_tw.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_codecs_tw.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_multibytecodec.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_multibytecodec.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/unicodedata.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/unicodedata.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_crypt.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_crypt.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/fcntl.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/fcntl.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/grp.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/grp.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/mmap.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/mmap.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/ossaudiodev.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/ossaudiodev.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_posixsubprocess.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_posixsubprocess.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/resource.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/resource.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/select.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/select.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_socket.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_socket.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/spwd.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/spwd.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/syslog.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/syslog.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/termios.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/termios.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_posixshmem.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_posixshmem.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_multiprocessing.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_multiprocessing.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_ctypes.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_ctypes.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_curses.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_curses.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_curses_panel.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_curses_panel.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_sqlite3.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_sqlite3.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_ssl.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_ssl.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_hashlib.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_hashlib.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_tkinter.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_tkinter.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/xxsubtype.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/xxsubtype.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_xxtestfuzz.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_xxtestfuzz.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_testbuffer.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_testbuffer.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_testinternalcapi.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_testinternalcapi.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_testcapi.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_testcapi.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_testclinic.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_testclinic.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_testimportmultiple.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_testimportmultiple.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_testmultiphase.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_testmultiphase.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_testsinglephase.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_testsinglephase.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/_ctypes_test.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/_ctypes_test.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/xxlimited.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/xxlimited.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 755 Modules/xxlimited_35.cpython-312-x86_64-linux-gnu.so /opt/python3/lib/python3.12/lib-dynload/xxlimited_35.cpython-312-x86_64-linux-gnu.so
/bin/install -c -m 644 ./Misc/python.man \
/opt/python3/share/man/man1/python3.12.1
if test ! -d /opt/python3/lib/pkgconfig; then \
echo "Creating directory /opt/python3/lib/pkgconfig"; \
/bin/install -c -d -m 755 /opt/python3/lib/pkgconfig; \
fi
if test -f /opt/python3/bin/python3 -o -h /opt/python3/bin/python3; \
then rm -f /opt/python3/bin/python3; \
else true; \
fi
(cd /opt/python3/bin; ln -s python3.12 python3)
if test "3.12" != "3.12"; then \
rm -f /opt/python3/bin/python3.12-config; \
(cd /opt/python3/bin; ln -s python3.12-config python3.12-config); \
rm -f /opt/python3/lib/pkgconfig/python-3.12.pc; \
(cd /opt/python3/lib/pkgconfig; ln -s python-3.12.pc python-3.12.pc); \
rm -f /opt/python3/lib/pkgconfig/python-3.12-embed.pc; \
(cd /opt/python3/lib/pkgconfig; ln -s python-3.12-embed.pc python-3.12-embed.pc); \
fi
rm -f /opt/python3/bin/python3-config
(cd /opt/python3/bin; ln -s python3.12-config python3-config)
rm -f /opt/python3/lib/pkgconfig/python3.pc
(cd /opt/python3/lib/pkgconfig; ln -s python-3.12.pc python3.pc)
rm -f /opt/python3/lib/pkgconfig/python3-embed.pc
(cd /opt/python3/lib/pkgconfig; ln -s python-3.12-embed.pc python3-embed.pc)
rm -f /opt/python3/bin/idle3
(cd /opt/python3/bin; ln -s idle3.12 idle3)
rm -f /opt/python3/bin/pydoc3
(cd /opt/python3/bin; ln -s pydoc3.12 pydoc3)
rm -f /opt/python3/bin/2to3
(cd /opt/python3/bin; ln -s 2to3-3.12 2to3)
if test "x" != "x" ; then \
rm -f /opt/python3/bin/python3-32; \
(cd /opt/python3/bin; ln -s python3.12-32 python3-32) \
fi
if test "x" != "x" ; then \
rm -f /opt/python3/bin/python3-intel64; \
(cd /opt/python3/bin; ln -s python3.12-intel64 python3-intel64) \
fi
rm -f /opt/python3/share/man/man1/python3.1
(cd /opt/python3/share/man/man1; ln -s python3.12.1 python3.1)
if test "xupgrade" != "xno" ; then \
case upgrade in \
upgrade) ensurepip="--upgrade" ;; \
install|*) ensurepip="" ;; \
esac; \
./python -E -m ensurepip \
$ensurepip --root=/ ; \
fi
Looking in links: /tmp/tmpeykwgd2r
Requirement already satisfied: pip in /opt/python3/lib/python3.12/site-packages (24.0)
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv

复制代码

[root@localhost ~]# echo "export PYTHON_HOME=/opt/python3" >> /etc/profile
[root@localhost ~]# echo "export PATH=$PYTHON_HOME/bin:$PATH" >> /etc/profile
[root@localhost ~]# source /etc/profile

复制代码

[root@localhost ~]# python3
Python 3.12.4 (main, Jul 4 2024, 09:38:24) [GCC 7.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> exit()
[root@localhost ~]# pip3 --version
pip 24.0 from /opt/python3/lib/python3.12/site-packages/pip (python 3.12)
[root@localhost ~]#

复制代码

[root@localhost ~]# cat python3-test.py
#!/opt/python3
def add(x, y):
return x + y
def subtract(x, y):
return x - y
def multiply(x, y):
return x * y
def divide(x, y):
if y != 0:
return x / y
else:
return "除数不能为0"
while True:
print("选择运算：")
print("1.加法")
print("2.减法")
print("3.乘法")
print("4.除法")
print("5.退出")
choice = input("输入你的选择(1/2/3/4/5): ")
if choice in ('1', '2', '3', '4'):
num1 = float(input("输入第一个数字: "))
num2 = float(input("输入第二个数字: "))
if choice == '1':
print("结果是:", add(num1, num2))
elif choice == '2':
print("结果是:", subtract(num1, num2))
elif choice == '3':
print("结果是:", multiply(num1, num2))
elif choice == '4':
print("结果是:", divide(num1, num2))
elif choice == '5':
print("退出程序。")
break
else:
print("无效输入")
[root@localhost ~]# python3 python3-test.py
选择运算：
1.加法
2.减法
3.乘法
4.除法
5.退出
输入你的选择(1/2/3/4/5): 1
输入第一个数字: 3
输入第二个数字: 65
结果是: 68.0
选择运算：
1.加法
2.减法
3.乘法
4.除法
5.退出
输入你的选择(1/2/3/4/5): 5
退出程序。

复制代码