Creo/IPEM 对drawing举行修改并check-in，必须同时check-out依靠的assembly并全部选中，才华check-in？

标题形貌

用户只对drawing举行了check-out并修改，再次check-in时，IPEM弹出告诫：

须要同时check-out依靠的assembly，并选择，才华check-in。
通用标题：对单一文件举行修改后，check-in时，须要将其全部的依靠件全部check-out，并全部选中，才华check-in.
办理方案

在ipem.properties中，有一个设置项：
checkin.cadversion.drawing.dependencies
将其设置为：checkin.cadversion.drawing.dependencies = never，可以让用户单独check-in单一文件。
官方表明：
This option controls whether the save operation can proceed
when any of the dependent models of the drawing are not selected
for saving.  Allowed values are “never”, “always” and “prompt”
If “never”, then save is allowed even any dependent models of
the drawing are not selected for saving. If “always”, then the save
operation is only allowed if all dependent models of drawing
are selected for saving. If “prompt”, the user is asked
whether to proceed with the save operation when any dependent
drawing model is not selected for saving.  The default value
is “always” because modifying a drawing in Creo can
modify a dependency.  If a site chooses to use “never” or “prompt”
the recommendation is to set “draw_models_read_only yes” in the
sites config.pro file. Relationships to Creo formats are
are ignored by the “dependent models” check. This preference does not
check the external dependent models of multi-model drawings that
were added to the dialog via checkin.saverelated.drawings.enable = true
or the right mouse button add drawings.  This preference has no
effect when revising drawings that are saved along with their
dependent model in the same Item. In that case the dependent
model must always be selected for saving.

免责声明：如果侵犯了您的权益，请联系站长，我们会及时删除侵权内容，谢谢合作！qidao123.com:ToB企服之家，中国第一个企服评测及软件市场,开放入驻,技术点评得现金